High quality bi-metal, 100mm jigsaw blade set for cutting metal.

• Bayonet fitting HCS blade with side-set milled teeth.
• Working length 75mm.

Mixing paddle ideal for mixing paint, filler, wallpaper paste, screed, mortar & plaster.

• For use with electric drills with a 8mm+ chuck.
• Easy-clean zinc plating with carbon steel construction.
• 8mm hex shaft with 12cm stirrer diameter.

Flexible blade filler knife with ergonomic soft grip handle.

• Rust free mirror finish ensures durability.
• Spring tempered high carbon steel blade.
• Hanging hole for easy storage.

6 " (150mm) Heavy duty scraper with 5 blades.

• Used for removing paint, tiles, flooring, adhesives, sealant and scale.
• 6" razor sharp blade and comfort grip handle.
• Twin grips for added purchase.

Heavy-duty, long handled wall scraper pre-fitted with 6" scraper blade that easily out-performs standard scraper blades.

• Used for removing paint, tiles, flooring, adhesives, sealant and scale.
• 6" razor sharp blade and comfort grip handle.
• Twin grips for comfort grip.

General purpose replacement blades for retractable and fixed blade knives.

• For use with utility knives, trimmers and scrapers.
• Made from hardened carbon steel for sharpness.
• Housed in plastic storage case.

General purpose replacement blades for retractable and fixed blade knives.

• For use with utility knives, trimmers and scrapers.
• Made from hardened carbon steel for sharpness.
• Housed in plastic storage case.

Heavy duty replacement blades for 6" scraper.

• Use with floor and wall scrapers for removal of dirt and grime.
• 100% thicker than standard blades for extra strength and durability.

Heavy duty replacement blades for 6" scraper.

• Use with floor and wall scrapers for removal of dirt and grime.
• Made from hardened carbon steel for sharpness.

Two component ergonomic handle with heat treated chrome vanadium steel blade and bevel edged.

• Split proof polypropylene handles can be struck with a hammer or mallet.
• Supplied in sizes;6, 12, 19, 25 and 32mm.

High quality HSS drill bits suitable for drilling hardened steel, cast iron, titanium, stainless steel and can also be used on wood and plastic.

• High heat resistance for particularly tough metal drilling.
• Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm.
• Robust display box.

Fully hardened and tempered for drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass.

• Precision ground point and shoulders for a superior clean cut and reduced splintering.
• Hex shank for quick change, for use with drills, drivers and hand braces.
• Angled cutting edges give faster cleaner cutting.  
• Sizes: 10, 12, 16, 18, 20, 25mm.

Made of hardened and tempered drop forged steel.

• Suitable for removing wall and floor tiles, splitting bricks or concrete.
• Ideal for use with any SDS machine.

High quality carbon steel, drop forged for durability.

• Chrome plated finish for corrosion protection.
• Max jaw opening: 31mm.

Wrecking crowbar normally used for dismantling timber work, plasterboard and pulling up floorboards and so on.

• Solid forged, hardened and tempered from hexagonal steel.
• Angled chisel end for leverage and claw with integrated nail puller.
• Powder-coated with ground claw and chisel.
• For general wrecking and demolition work.

1/2" x 20 UNF thread enables you to hold conventional bits in an SDS drill.

• Suitable for cordless and AC hammer action drills.
• Supplied with SDS plus adaptor and chuck key.
• 2-13mm capacity.

Sturdy steel gun with impact pressure adjustment lock.

• Adjustable power control allows for precise control and lock down handle allows for safe storage.
• Suitable for 4-14mm staples, 10-12mm U staples & 10-14mm nails.
• Comes with 200: 12mm U staples, 10mm nails and 8mm staples in plastic storage case.

2000 watt wallpaper stripper ideal for removing all types of wallpaper. Uses tap water and strips multiple layers of paper.

• 3m flexible hose and controlled temperature.
• Fast heat-up time with 80 mins working time.
• 4.5Ltr capacity and 320 x 325mm steam pad.

Impact resistant toolbox with two metal latches, three durable rear hinges and built-in padlock eye for security.

• Two in-built side handles and extra latches for secure carriage.
• In-lid storage and tote tray for efficient organisation.
• Removable tote tray 550 x 270 x 45mm.
• Dimensions: 710 x 315 x 290mm.

Perfect for painting, wallpapering and preparation work on ceilings, walls and windows.

• Lightweight yet sturdy aluminium, folding construction with  large, flat platform area.
• Reduces the number of times you would have to reposition the work platform when compared with using stepladders.
• Comfortable on feet and legs for extended periods of work when compared with standing on the steps of a ladder.
• Platform area: 700mm x 300mm.
• Working height: 500mm.

Robust, rot resistant, rigid and very stable, whilst being lightweight and easy to carry.

• Rigid box section back legs with additional cross braces and \'K\' straps for improved strength and stability.
• Non-conductive fibreglass legs ideal for use where electrical hazards exist.
• Heavy duty, non-slip, extra depth (80mm) aluminium treads.
• Heavy duty rubber feet and metal side arms prevent slips and twists.  
• Maximum capacity 150kg with built-in tool and can holder.
• Conforms to trade standard EN131-1:1993 EN131-2:1993.

Robust, rot resistant, rigid and very stable, whilst being lightweight and easy to carry.
Rigid box section back legs with additional cross braces and \'K\' straps for improved strength and stability.

• Non-conductive fibreglass legs ideal for use where electrical hazards exist.
• Heavy duty, non-slip, extra depth (80mm) aluminium treads.
• Heavy duty rubber feet and metal side arms prevent slips and twists.  
• Maximum capacity 150kg with built-in tool and can holder.
• Conforms to trade standard EN131-1:1993 EN131-2:1993.

Robust, rot resistant, rigid and very stable, whilst being lightweight and easy to carry.

• Rigid box section back legs with additional cross braces and \'K\' straps for improved strength and stability.
• Non-conductive fibreglass legs ideal for use where electrical hazards exist.
• Heavy duty, non-slip, extra depth (80mm) aluminium treads.
• Heavy duty rubber feet and metal side arms prevent slips and twists.  
• Maximum capacity 150kg with built-in tool and can holder.
• Conforms to trade standard EN131-1:1993 EN131-2:1993.