No products in the cart.
Multifit Plastic Friction Washer 40mm
Great replacement for any worn or lost plastic washer on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.
Multifit Rubber Olive 40mm
Great replacement for any worn or lost rubber olive on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.
Siamp Diaphragm Washer
Cistern Valve Inlet fill valve Diaphragm washer.
- Replacement diaphragm washer for Siamp valves.
- Fits bottom and side inlet filling valves.
Water Tap Insert Replacement Aerator 22mm
Plastic insert to replace exisiting tap aerator part without need to change the whole aerator or tap.
- This part will fit all standard 22mm and 24mm tap aerators, either female or male version.
- Flow rate: 9 L/min.
- Gasket included.
Basin 3 Part Waste Seal Kit 1.25" (32mm)
Installation kit for peace of mind from dripping basin through the edges of waste.
- 1 1/4" Basin | Vanity Waste Seal Kit perfect for DIY and Trade Applications.
- Heavy duty for a tight and secure leak-free fit.
- High quality tapered rubber seal with foam washer and waste lock nut.
Flexible Rubber Coupling
Time saving solution to convert from the old lead pipes to PVC solvent waste pipes.
- Works with cast iron, plastic, copper, lead and steel pipes.
- Ideal for permanent use & emergency repairs.
- Reusable with no glueing, just tighten with a screwdriver.
- Resistant to chemicals, UV and fungus damage.
- Flexible and durable pvc rubber.
Isolating Ball Valve CP
Suitable for compression fittings on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- Screwdriver slot operation for full flow applications.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
Full Bore Isolating Ball Valve CP
Suitable for compression fittings on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- Full-port valve without flow restriction in the piping, cavitation or loss of pressure.
- Screwdriver slot operation for full flow applications.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
Braided Flexible Tap Connector 300mm
Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 500mm
Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector & ISO Valve
15mmx1/2”x300mm Stainless steel braided flexible hose with 15mm compression fitting with ISO Valve at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Flexible Monobloc Tap Connectors 15mmxM10 2PK
Monobloc connectors join 15mm copper tube to the base of a monobloc sink mixer that has 12mm theaded holes.
15mm compression fitting to 12mm male thread to fit base of monobloc.
- The nuts are set at different height levels to aid fitting/removal when the fixing holes on the monoblock are set close together.
- Supplied in pairs.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Straight Washing Machine Valve 15mm x 3/4"
Ideal for connection of water inlets to washing machines or dish washers.
- Operated by a plastic red or blue lever for either hot or cold water supplies.
- 15mm compression to 3/4" hose.
- Chrome plated brass.
Angled Washing Machine Valve 15mm x 3/4"
Ideal for connection of water inlets to washing machines or dish washers at 90° bend.
Operated by a plastic red or blue lever for either hot or cold water supplies.
15mm compression to 3/4" hose.
Chrome plated brass.
Tee Washing Machine Valve 15mm x 3/4"
Ideal for connection of water inlets to washing machines or dish washers.
- Operated by a plastic red or blue lever for either hot or cold water supplies.
- 15mm compression to 3/4" hose.
- Chrome plated brass.
Straight Non Return Washing Machine Valve 15mm x 3/4"
Ideal for connection of water inlets to washing machines or dish washers.
- One-way directional valve permit water to flow in one direction, preventing flow from reversing down the line.
- Operated by a plastic red or blue lever for either hot or cold water supplies.
- 15mm compression to 3/4" hose.
- Chrome plated brass.
Hose Union BibCock 1/2"
Hose union bibcock complete with double check valve is an ideal replacement for an outside tap.
- Compatible with most garden hoses.
- Double check valve with 1/2" connection.
- Made from solid brass.
Wallplate Elbow 15mm x 1/2”
Used for fixing a 1/2" tap and 15mm copper supply pipe to the wall.
- Compatible with most union bibcock taps.
- Made from solid brass.
Compression Gate Valve
Light pattern brass gate valve comes with a wheel head and 15mm compression fittings for quick, simple installation.
- Used for isolating or restricting water supply.
- Easy to use and is suitable for use with hot and cold water.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Compression Stopcock
Used for isolating or restricting water supply.
- 15mm compression fittings for quick, simple installation.
- Easy to use and is suitable for use with hot and cold water.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS 1010-2:1973.
Pan Connector Straight 110mm
110mm push fit pan connector, suitable for commercial or domestic repairs & maintenance jobs.
- Straight rigid polypropylene WC pan connector for use with 4" (110mm) pipe.
- Suitable for all 4"/110mm PVC-U and cast iron soil pipes.
- Manufactured to BS5627.
Pan Connector Offset 110mm
110mm push fit pan connector, suitable for commercial or domestic repairs & maintenance jobs.
- Offset rigid polypropylene WC pan connector for use with 4" (110mm) pipe.
- Suitable for all 4"/110mm PVC-U and cast iron soil pipes.
- Manufactured to BS5627.
104° Pan Connector 110mm
110mm push fit pan connector, suitable for commercial or domestic repairs & maintenance jobs.
- 104° rigid polypropylene WC pan connector for use with 4" (110mm) pipe.
- Suitable for all 4"/110mm PVC-U and cast iron soil pipes.
- Manufactured to BS5627.
90° Pan Connector 110mm
110mm push fit pan connector, suitable for commercial or domestic repairs & maintenance jobs.
- 90° rigid polypropylene WC pan connector for use with 4" (110mm) pipe.
- Suitable for all 4"/110mm PVC-U and cast iron soil pipes.
- Manufactured to BS5627.