No products in the cart.
Grade 13 Fire Hinges Satin Stainless Steel 102 x 76mm
Contract range durable Grade 13 Fire Hinges with wood screws.
- Usually used for FD30 & FD60 fire doors.
- Fire rated; Conforms to BS EN 1935 grade 13. BS EN 1634 standards
- Stainless steel with Satin finish.
- Supplied in a pack of two or three.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Float Valve Part 1 High Pressure
Use in cold water storage tanks, central heating feed and expansion header tanks, toilet cisterns.
- Easy to fit and long lasting.
- High quality brass material.
- Manufactured in accordance with BS1212 part 1.
MultiMax Drill Bit 6.0 X 200mm
The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.
- The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
- Universal drill bit can drill through multi-substrates in one go, effortlessly.
- The drill bit is suitable for use with or without the hammer setting.
Brass Flanged Backnut
Replacement or alternative for the standard plastic back nuts supplied with 1/2" & 3/4" taps.
- Supplied backnuts are available in sizes of 1/2" & 3/4" to suit sink, wash hand basin and bath taps.
- Ideal for use in areas with limited space.
- Made from durable brass.