No products in the cart.
Active filters
Hinged Cover Caps White PK100
Durable polyamide manufactured screw, cover cap.
- Used as a decorative finish for screw heads.
- Available in a variety of sizes and colours.
- Standard size, suitable for 6-8g (3.5-4.0mm) screws.
- Large size, suitable for 10-12g (5.0-6.0mm) screws.
- Can be used with most types of screws.
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Internal Ply Flush Door (Imperial Size)
Internal plywood unfinished paint grade flush door ready to paint.
- An economical solution for both commercial and domestic properties.
- Lipped on the two long edges for ease of installation on refurbishment projects.
- 10 year manufacturer\'s guarantee.
- 35mm thickness.
End Feed Metric to Imperial Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For conversion installation from Metric to Imperial size and vice versa.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Bent Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Straight Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
Compression Coupler M1
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation from Imperial to Metric.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 300mm
Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 500mm
Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.