No products in the cart.
F44 Acrylic Floor Tile Adhesive
F Ball F44 is a solvent free, acrylic emulsion adhesive.
- It is designed to give a high bond strength, strong initial tack and long open time.
- It is protected against biodegradation and is suitable for the use over underfloor heating installations.
- Perfect for vinyl floor tiles, linoleum, carpet, timber and laminate flooring.
Magnetic Catch White
Magnetic catches are a simple and effective way of keeping doors held in place once closed.
- Typically fitted on the inside off the door so remain out of sight.
- Used in furniture such as cupboards, doors, frames, panels, boards, displays, etc.
- Supplied in 45mm & 62mm.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Internal 30 Min Fire Check Door FD30 (Metric Size)
This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- An economical solution for both commercial and domestic properties.
- 10 year manufacturer\'s guarantee.
- Ready to stain or paint with semi-solid core.
- 44mm thickness.
Compression Stop End
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For capping copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Compression Gate Valve
Light pattern brass gate valve comes with a wheel head and 15mm compression fittings for quick, simple installation.
- Used for isolating or restricting water supply.
- Easy to use and is suitable for use with hot and cold water.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Zinsser Perma-White Self-Priming White Matt
Perma-White® ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
- Paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance.
- Bonds to existing solvent-based or glossy paints.
- Seals flat paint, new drywall, cement block and concrete.