These vents are used to provide background ventilation in habited spaces which are meant to be naturally ventilated by removing polluted indoor air and replacing it with clean fresh outside air to create a healthy living environment, without creating a draught.

• Has an outstanding resistance to weathering, ageing and yellowing
• Made of tough and durable plastic ASA (Acrylonitrile Styrene Acrylate).
• Fixing screws and quick fit cover caps provided.
• Supplied in size; 200mm, 300mm, 400mm & 595mm.

Openlock are made from heat resistant polypropylene.

• Designed to withstand the temperature changes in most central heating systems.
• The pipe simply snaps into the bracket.
• Suitable for 15/22mm pipe connections.

Designed to withstand the temperature changes in most central heating systems.

• Self-locking tops, tested to over 100lb pull.
• Manufactured from heat resistant polypropylene.
• Suitable for 15/22mm pipe connections.

Lightweight and flexible pipe for wide range on installation applications in domestic and commercial use.

• Easy to handle and ideal for cabling through joists.
• Suitable for central heating systems.
• Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S

Traditional copper pipes for domestic and commercial installations above ground services.

• Highly durable, easy to work with and to install.
• Corrosion and ultraviolet resistant.
• Biostatic with excellent thermal conductivity.
• WRAS Approved, Conforms to - BS EN1057.

Fully removable and reusable push fit system for quick installation.

• No tools needed - push straight onto copper tube.
• Suitable for Drinking Water.
• Suitable for central heating systems.
• Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S

Fully removable and reusable push fit system for quick installation.

• No tools needed - push straight onto copper tube.
• Suitable for Drinking Water.
• Suitable for central heating systems.
• Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S

Fully removable and reusable push fit system for quick installation.

• No tools needed - push straight onto copper tube.
• Suitable for Drinking Water.
• Suitable for central heating systems.
• Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S

Fully removable and reusable push fit system for quick installation.

• No tools needed - push straight onto copper tube.
• Suitable for Drinking Water.
• Suitable for central heating systems.
• Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S

Fully removable and reusable push fit system for quick installation.

• No tools needed - push straight onto copper tube.
• Suitable for Drinking Water.
• Suitable for central heating systems.
• Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with lead free solder.
• Easy,low cost effective connection.
• WRAS Approved - Conforms to - EN1254-1: 1998.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with lead free solder.
• Easy, low cost effective connection.
• WRAS Approved - Conforms to - EN1254-1: 1998.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with lead free solder.
• Easy,low cost effective connection.
• WRAS Approved - Conforms to - EN1254-1: 1998.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with lead free solder.
• Easy,low cost effective connection.
• WRAS Approved - Conforms to - EN1254-1: 1998.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with lead free solder.
• Easy,low cost effective connection.
• WRAS Approved - Conforms to - EN1254-1: 1998.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For capping copper pipes and fittings with lead free solder.
• Easy,low cost effective connection.
• WRAS Approved - Conforms to - EN1254-1: 1998.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For capping copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.

• For connecting copper pipes with compression installation.
• Easy & quick installation with no soldering or heat required.
• Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.