Contract range durable steel butt hinges with wood screws.

• Usually used for plyflash internal doors.
• Not fire rated.
• Rolled steel with zinc plated finish.

Designed to fit bullnose radius worktops with all major worktop brands.

• Perfect alignment and fit with worktop.
• Light & strong aluminium.
• 630mm long easily cuts to length required.
• Universal left or right fitting.

Designed to fit bullnose radius worktops with all major worktop brands.

• Perfect alignment and fit with worktop.
• Light & strong aluminium in matt black finish.
• 630mm long easily cuts to length required.
• Universal left or right fitting.

Corner Trim designed to connect worktops at a 90° angle.

• Perfect alignment and fit with worktop at 90° joint.
• Light & strong aluminium.
• 630mm long easily cuts to length required.
• Universal left or right fitting.

Corner Trim designed to connect worktops at a 90° angle.

• Perfect alignment and fit with worktop at 90° joint.
• Light & strong aluminium.
• 630mm long easily cuts to length required.
• Universal left or right fitting.

Designed to join bullnose radius worktops with all major worktop brands.

• Perfect alignment and fit with worktop.
• Light & strong aluminium in matt black finish.
• 630mm long easily cuts to length required.
• Universal left or right fitting.

Designed to join bullnose radius worktops with all major worktop brands.

• Perfect alignment and fit with worktop.
• Light & strong aluminium in matt black finish.
• 630mm long easily cuts to length required.
• Universal left or right fitting.

Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.

• Suitable for most kitchen and bathroom taps.
• Easy to install with no soldering or heat required.
• Easy fix for difficult pipe work.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.

• Suitable for most kitchen and bathroom taps.
• Easy to install with no soldering or heat required.
• Easy fix for difficult pipe work.
• Reusable with copper olive only replacement.
• WRAS Approved - Conforms to - BS EN1254-2.

The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.

• The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
• Universal drill bit can drill through multi-substrates in one go, effortlessly.
• The drill bit is suitable for use with or without the hammer setting.