No products in the cart.
Panel Pins Bright 40mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Panel Pins Bright 25mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Annular Ring Shank Nails 20mm
Multi-purpose nails suitable for use with both soft and hard woods.
- Suitable for use with both soft and hard woods.
- Ideal when permanent strength and holding power are of primary importance.
- Rings on shank are sloped in a conical shape to ensure clean insertion but design ensures difficulty in release.
- Often used to fix hardboard sheeting to floorboards, offering a strong secure fixing.
Grade 13 Fire Hinges Satin Stainless Steel 102 x 76mm
Contract range durable Grade 13 Fire Hinges with wood screws.
- Usually used for FD30 & FD60 fire doors.
- Fire rated; Conforms to BS EN 1935 grade 13. BS EN 1634 standards
- Stainless steel with Satin finish.
- Supplied in a pack of two or three.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Compression Stop End
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For capping copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Compression Gate Valve
Light pattern brass gate valve comes with a wheel head and 15mm compression fittings for quick, simple installation.
- Used for isolating or restricting water supply.
- Easy to use and is suitable for use with hot and cold water.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.