No products in the cart.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Intumescent Fire Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little off-cuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire & Smoke Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little offcuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Internal 30 Min Fire Check Door FD30 (Imperial Size)
This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- An economical solution for both commercial and domestic properties.
- 10 year manufacturer\'s guarantee.
- Ready to stain or paint with semi-solid core.
- 44mm thickness.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Contract Compression Straight Connector
Contract Range compression multifit straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Compression fit - no solvent welding required.
- Manufactured in polypropylene.
Contract Compression 90° Bend Connector
Contract Range compression multifit 90° Bend connector 32/40mm for domestic and commercial use.
Suitable for all waste pipe connections.
Compression fit - no solvent welding required.
Manufactured in polypropylene.
Flexible Waste Connector 290mm
Compression flexible waste connector 290mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Flexible Waste Connector 460mm
Compression flexible waste connector 460mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Waste Pipe Clip
Standard saddle plastic clip for 32/40mm waste pipe for domestic and commercial use.
- Manufactured in polypropylene.
- Easy to fit.
- Supplied in white only.
Solvent Waste Pipe 3m White
White strong ABS waste pipe for carrying waste of the property.
- Lightweight and strong cost-effective option.
- Simple to handle and install with solvent cement.
- Can be used in domestic and commercial use.
Solvent Weld Access Plug White
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Straight Coupling
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Knuckle Bend 90°
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Swept Bend 92.5°
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Bend 45°
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Conversion Bend 90°
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Tee
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.