No products in the cart.
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Float Valve Part 1 High Pressure
Use in cold water storage tanks, central heating feed and expansion header tanks, toilet cisterns.
- Easy to fit and long lasting.
- High quality brass material.
- Manufactured in accordance with BS1212 part 1.
Braided Flexible Tap Connector 300mm
Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 500mm
Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Expert Range Spirit Level
Manufactured from 1.2mm thick extruded aluminium with milled top and bottom faces, ribbed sides and protective end caps.
- Box section width 59mm with hanging hole for storage.
- Accurate to 1mm/m. with 45°, 90° and 180° vials.
- Supplied in 600mm, 900mm and 1200mm.
Brass Flanged Backnut
Replacement or alternative for the standard plastic back nuts supplied with 1/2" & 3/4" taps.
- Supplied backnuts are available in sizes of 1/2" & 3/4" to suit sink, wash hand basin and bath taps.
- Ideal for use in areas with limited space.
- Made from durable brass.