No products in the cart.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Float Valve Part 1 High Pressure
Use in cold water storage tanks, central heating feed and expansion header tanks, toilet cisterns.
- Easy to fit and long lasting.
- High quality brass material.
- Manufactured in accordance with BS1212 part 1.
Expert Range Spirit Level
Manufactured from 1.2mm thick extruded aluminium with milled top and bottom faces, ribbed sides and protective end caps.
- Box section width 59mm with hanging hole for storage.
- Accurate to 1mm/m. with 45°, 90° and 180° vials.
- Supplied in 600mm, 900mm and 1200mm.
Brass Flanged Backnut
Replacement or alternative for the standard plastic back nuts supplied with 1/2" & 3/4" taps.
- Supplied backnuts are available in sizes of 1/2" & 3/4" to suit sink, wash hand basin and bath taps.
- Ideal for use in areas with limited space.
- Made from durable brass.