No products in the cart.
F44 Acrylic Floor Tile Adhesive
F Ball F44 is a solvent free, acrylic emulsion adhesive.
- It is designed to give a high bond strength, strong initial tack and long open time.
- It is protected against biodegradation and is suitable for the use over underfloor heating installations.
- Perfect for vinyl floor tiles, linoleum, carpet, timber and laminate flooring.
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Base Unit Shelf
Compatible with all base & wall units supplied by us.
- Perfect solution for replacement as well as to add additional storage shelf.
- Supplied in all stocked sizes from 300mm to 1000mm.
- Supplied in white matt finish only.
Full Height Unit Door
Compatible with all base & wall units supplied by us.
- Perfect solution for replacement.
- Supplied in all stocked sizes from 200mm to 600mm.
- Supplied in white matt finish only.
Drawerline Unit Door
Compatible with all base & wall units supplied by us.
- Perfect solution for replacement in drawerline units.
- Supplied in all stocked sizes from 300mm to 600mm.
- Supplied in white matt finish only.
Drawer Front
Compatible with all base & wall units supplied by us.
- Perfect solution for replacement in drawerline units.
- Supplied in all stocked sizes from 300mm to 600mm.
- Supplied in white matt finish only.
Expert Range Spirit Level
Manufactured from 1.2mm thick extruded aluminium with milled top and bottom faces, ribbed sides and protective end caps.
- Box section width 59mm with hanging hole for storage.
- Accurate to 1mm/m. with 45°, 90° and 180° vials.
- Supplied in 600mm, 900mm and 1200mm.
MultiMax Drill Bit 6.0 X 200mm
The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.
- The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
- Universal drill bit can drill through multi-substrates in one go, effortlessly.
- The drill bit is suitable for use with or without the hammer setting.