No products in the cart.
Active filters
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Plywood Solid Core Blank Fire Door FD30
This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- Solid core blank is a versatile door which can be used in a variety of scenarios.
- Door blank can be cut to accommodate different frame sizes.
- Solid core door blank ready to paint.
- 44mm thickness.
MultiMax Drill Bit 6.0 X 200mm
The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.
- The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
- Universal drill bit can drill through multi-substrates in one go, effortlessly.
- The drill bit is suitable for use with or without the hammer setting.