No products in the cart.
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
MultiMax Drill Bit 6.0 X 200mm
The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.
- The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
- Universal drill bit can drill through multi-substrates in one go, effortlessly.
- The drill bit is suitable for use with or without the hammer setting.