No products in the cart.
Friction Hinge uPVC/Timber - Pair
Friction Hinge/Stay Suitable for uPVC, timber and aluminium.
- Stainless steel for enhanced corrosion resistance.
- Supplied in a pack of two (1 Left, 1 Right).
- Top Hung 13mm stack.
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
White Trickle Vent
These vents are used to provide background ventilation in habited spaces which are meant to be naturally ventilated by removing polluted indoor air and replacing it with clean fresh outside air to create a healthy living environment, without creating a draught.
- Has an outstanding resistance to weathering, ageing and yellowing
- Made of tough and durable plastic ASA (Acrylonitrile Styrene Acrylate).
- Fixing screws and quick fit cover caps provided.
- Supplied in size; 200mm, 300mm, 400mm & 595mm.
Expert Range Spirit Level
Manufactured from 1.2mm thick extruded aluminium with milled top and bottom faces, ribbed sides and protective end caps.
- Box section width 59mm with hanging hole for storage.
- Accurate to 1mm/m. with 45°, 90° and 180° vials.
- Supplied in 600mm, 900mm and 1200mm.
MultiMax Drill Bit 6.0 X 200mm
The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.
- The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
- Universal drill bit can drill through multi-substrates in one go, effortlessly.
- The drill bit is suitable for use with or without the hammer setting.