No products in the cart.
Panel Pins Bright 40mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Panel Pins Bright 25mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Annular Ring Shank Nails 20mm
Multi-purpose nails suitable for use with both soft and hard woods.
- Suitable for use with both soft and hard woods.
- Ideal when permanent strength and holding power are of primary importance.
- Rings on shank are sloped in a conical shape to ensure clean insertion but design ensures difficulty in release.
- Often used to fix hardboard sheeting to floorboards, offering a strong secure fixing.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Rigid uPVC Angle 25mm x 25mm
Used in wide range of applications; bath panel corners, plinth corners or cabinets,corner guards, wall protection, stair nosing, hiding screw holes.
- 100 % Waterproof tough and durable plastic.
- Ideal for Kitchens & Bathrooms.
- Can be used as a Internal or External Corner.
- Will not fade and last a life time.
- Can easily be cut without any special tools.
9mm uPVC Window Board 300mm
uPVC window board will not warp, rot, flake or split;can be sawn, drilled and shaped as easily as timber - using exactly the same tools.
- Window board is simple and easy to install, providing a tough finish and requiring little or no maintenance.
- 100 % Waterproof tough and durable plastic.
- Can easily be cut without any special tools.
- Can be used for internal and external projects.
- Ideal as a window cill or box covers.
Internal 30 Min Fire Check Door FD30 (Imperial Size)
This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- An economical solution for both commercial and domestic properties.
- 10 year manufacturer\'s guarantee.
- Ready to stain or paint with semi-solid core.
- 44mm thickness.
Compression Stop End
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For capping copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Compression Gate Valve
Light pattern brass gate valve comes with a wheel head and 15mm compression fittings for quick, simple installation.
- Used for isolating or restricting water supply.
- Easy to use and is suitable for use with hot and cold water.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.