No products in the cart.
Hinged Cover Caps White PK100
Durable polyamide manufactured screw, cover cap.
- Used as a decorative finish for screw heads.
- Available in a variety of sizes and colours.
- Standard size, suitable for 6-8g (3.5-4.0mm) screws.
- Large size, suitable for 10-12g (5.0-6.0mm) screws.
- Can be used with most types of screws.
White Trickle Vent
These vents are used to provide background ventilation in habited spaces which are meant to be naturally ventilated by removing polluted indoor air and replacing it with clean fresh outside air to create a healthy living environment, without creating a draught.
- Has an outstanding resistance to weathering, ageing and yellowing
- Made of tough and durable plastic ASA (Acrylonitrile Styrene Acrylate).
- Fixing screws and quick fit cover caps provided.
- Supplied in size; 200mm, 300mm, 400mm & 595mm.
Vent-A-Matic Rotary Ventilator
Cord operated non-electrical shuttered fan.
- Great solution for kitchens and bathrooms.
- For use with single glass; aperture 121mm.
- Performance; 5093mm2.
- Supplied in size; 121mm & 162mm.
End Feed Metric to Imperial Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For conversion installation from Metric to Imperial size and vice versa.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Bent Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Straight Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
Compression Coupler M1
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation from Imperial to Metric.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 300mm
Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 500mm
Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.