No products in the cart.
Quick Drying Satin Wood Stain
Everbuild Quick Drying Wood Stain is a professional, low solvent wood stain that enhances the natural qualities of wood, and provides long lasting protection.
- Ideal for use on smooth planed exterior and interior timber, such as doors, window frames, architectural timbers, conservatories, cladding & garden furniture etc.
- Excellent resistance to ultra violet light degradation.
- Crack and peel resistant finish.
- Weatherproof protection.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Compression Stop End
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For capping copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Compression Gate Valve
Light pattern brass gate valve comes with a wheel head and 15mm compression fittings for quick, simple installation.
- Used for isolating or restricting water supply.
- Easy to use and is suitable for use with hot and cold water.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
MultiMax Drill Bit 6.0 X 200mm
The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.
- The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
- Universal drill bit can drill through multi-substrates in one go, effortlessly.
- The drill bit is suitable for use with or without the hammer setting.
Auger Bit 25mm
Fine pitch spiral pulls auger into workpiece and single spur slices timber ahead of the cutting edge, for accurate holes.
- Precision ground, hardened high carbon steel hex shank auger bit.
- Deep, auger-style flutes ensure rapid drilling.
- Size supplied; 25 x 235mm & 25 x 450mm.