No products in the cart.
Panel Pins Bright 40mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Panel Pins Bright 25mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Annular Ring Shank Nails 20mm
Multi-purpose nails suitable for use with both soft and hard woods.
- Suitable for use with both soft and hard woods.
- Ideal when permanent strength and holding power are of primary importance.
- Rings on shank are sloped in a conical shape to ensure clean insertion but design ensures difficulty in release.
- Often used to fix hardboard sheeting to floorboards, offering a strong secure fixing.
Quick Drying Satin Wood Stain
Everbuild Quick Drying Wood Stain is a professional, low solvent wood stain that enhances the natural qualities of wood, and provides long lasting protection.
- Ideal for use on smooth planed exterior and interior timber, such as doors, window frames, architectural timbers, conservatories, cladding & garden furniture etc.
- Excellent resistance to ultra violet light degradation.
- Crack and peel resistant finish.
- Weatherproof protection.
White Trickle Vent
These vents are used to provide background ventilation in habited spaces which are meant to be naturally ventilated by removing polluted indoor air and replacing it with clean fresh outside air to create a healthy living environment, without creating a draught.
- Has an outstanding resistance to weathering, ageing and yellowing
- Made of tough and durable plastic ASA (Acrylonitrile Styrene Acrylate).
- Fixing screws and quick fit cover caps provided.
- Supplied in size; 200mm, 300mm, 400mm & 595mm.
Intumescent Fire Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little off-cuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire & Smoke Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little offcuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Snap-on Pipe Clip
Openlock are made from heat resistant polypropylene.
- Designed to withstand the temperature changes in most central heating systems.
- The pipe simply snaps into the bracket.
- Suitable for 15/22mm pipe connections.
Hinged Pipe Clip
Designed to withstand the temperature changes in most central heating systems.
- Self-locking tops, tested to over 100lb pull.
- Manufactured from heat resistant polypropylene.
- Suitable for 15/22mm pipe connections.
Speedfit Layflat Pipe 25M Coil
Lightweight and flexible pipe for wide range on installation applications in domestic and commercial use.
- Easy to handle and ideal for cabling through joists.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Copper Pipe 3m Tube
Traditional copper pipes for domestic and commercial installations above ground services.
- Highly durable, easy to work with and to install.
- Corrosion and ultraviolet resistant.
- Biostatic with excellent thermal conductivity.
- WRAS Approved, Conforms to - BS EN1057.
Speedfit Equal Straight Coupler
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Equal Elbow
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Equal Tee
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Stop End
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Tube Support
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
End Feed Straight Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Equal 90° Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy, low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed 90° Street Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed 45° Obtuse Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.