No products in the cart.
Active filters
Rigid uPVC Angle 25mm x 25mm
Used in wide range of applications; bath panel corners, plinth corners or cabinets,corner guards, wall protection, stair nosing, hiding screw holes.
- 100 % Waterproof tough and durable plastic.
- Ideal for Kitchens & Bathrooms.
- Can be used as a Internal or External Corner.
- Will not fade and last a life time.
- Can easily be cut without any special tools.
9mm uPVC Window Board 300mm
uPVC window board will not warp, rot, flake or split;can be sawn, drilled and shaped as easily as timber - using exactly the same tools.
- Window board is simple and easy to install, providing a tough finish and requiring little or no maintenance.
- 100 % Waterproof tough and durable plastic.
- Can easily be cut without any special tools.
- Can be used for internal and external projects.
- Ideal as a window cill or box covers.
Internal 30 Min Fire Check Door FD30 (Imperial Size)
This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- An economical solution for both commercial and domestic properties.
- 10 year manufacturer\'s guarantee.
- Ready to stain or paint with semi-solid core.
- 44mm thickness.
End Feed Metric to Imperial Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For conversion installation from Metric to Imperial size and vice versa.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Bent Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Straight Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
Compression Coupler M1
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation from Imperial to Metric.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 300mm
Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Flexible Rubber Coupling
Time saving solution to convert from the old lead pipes to PVC solvent waste pipes.
- Works with cast iron, plastic, copper, lead and steel pipes.
- Ideal for permanent use & emergency repairs.
- Reusable with no glueing, just tighten with a screwdriver.
- Resistant to chemicals, UV and fungus damage.
- Flexible and durable pvc rubber.
Braided Flexible Tap Connector 500mm
Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.