No products in the cart.
Panel Pins Bright 40mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Panel Pins Bright 25mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Annular Ring Shank Nails 20mm
Multi-purpose nails suitable for use with both soft and hard woods.
- Suitable for use with both soft and hard woods.
- Ideal when permanent strength and holding power are of primary importance.
- Rings on shank are sloped in a conical shape to ensure clean insertion but design ensures difficulty in release.
- Often used to fix hardboard sheeting to floorboards, offering a strong secure fixing.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
SDS Plus Masonry Drill Bit
For professional drilling in concrete and masonry.
- Tungsten carbide tip offers fast, easy drilling.
- Shot-peined finish which hardens the surface of the bit and also helps to eliminate stress fractures.
- Fully hardened (HRC 48) chrome-alloy steel body ensures long bit life and minimises breakage.
- Drills clean, accurate fixing and clearance holes.
Titanium-Coated Flat Bit
Titanium coated for a longer life. For drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass.
- Precision ground point and shoulders for a superior clean cut and reduced splintering.
- Hex shank for quick change, for use with drills, drivers and hand braces.
- Fully hardened high carbon steel tri-point bit.