No products in the cart.
F44 Acrylic Floor Tile Adhesive
F Ball F44 is a solvent free, acrylic emulsion adhesive.
- It is designed to give a high bond strength, strong initial tack and long open time.
- It is protected against biodegradation and is suitable for the use over underfloor heating installations.
- Perfect for vinyl floor tiles, linoleum, carpet, timber and laminate flooring.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Auger Bit 25mm
Fine pitch spiral pulls auger into workpiece and single spur slices timber ahead of the cutting edge, for accurate holes.
- Precision ground, hardened high carbon steel hex shank auger bit.
- Deep, auger-style flutes ensure rapid drilling.
- Size supplied; 25 x 235mm & 25 x 450mm.