No products in the cart.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Reducer 32-40mm
Compression Multifit Reducer 32-40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Flexible Waste Connector 290mm
Compression flexible waste connector 290mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Flexible Waste Connector 460mm
Compression flexible waste connector 460mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Multifit Rubber Olive 40mm
Great replacement for any worn or lost rubber olive on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.
Multifit Plastic Friction Washer 40mm
Great replacement for any worn or lost plastic washer on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.
Washing Machine Standpipe 1.5" (40mm)
Washing machine trap complete with 0.6m upstand pipe and two clips is suitable for installation behind a washing machine when vertical drainage is required for waste water.
- McAlpine 75mm Water Seal Standpipe Trap with 1½" Multifit Outlet.1 ½"
- Suits all plastic to copper or lead pipe.
- Adjustable up to 750mm and can be cut to size.
- Conforms to BS EN 274-1:2002.
Anti Cross-Flow & Rodent Barrier Valve
Deters rodents from entering the building through WC and prevents cross flow if fitted to back to back WC pans.
- For use with any rigid or flexible WC connector with 4"/110mm rubber outlet seal.
- Can be installed horizontally or vertically.
- Manufactured in black polypropylene to prevent light penetration.
Ratchet Action Plastic Pipe Cutter 42mm
Monument plastic pipe cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20®, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving.
- Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut.
- The cutting blade is made from stainless steel and can be replaced easily.
- Maximum Pipe Size: 42mm ratchet action.
Automatic Copper Pipe Cutter
Monument automatic pipe cutter is ideal for cutting copper pipe in confined spaces.
- A tough ABS housing covers the steel mechanism which takes any strain.
- Easy to use it cuts once the gate of the tool is closed over the pipe.
- To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt.
- Cuts in two directions, NOT for use on stainless steel.
Autocut Copper Pipe Cutter
The Monument Autocut Pipe Cutter has an aluminium body.
- Its compact size means that it is ideal for work in confined spaces.
- The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints.
- It will only cut the exact size of copper pipe specified.
- Cuts in two directions, NOT for use on stainless steel.
- Size supplied; 15mm & 22mm.
Gas Brazing Torch
Monument 3450G is suitable for soldering and brazing of copper, brass and aluminium.
- The Gas Torch has Piezo ignition and produces a hot turbine flame, with a flame lock button.
- The flame size can be changed via an adjustable valve.
- An ergonomic hand grip ensures comfortable use.