Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.

• Suitable for most sinks.
• Flexible waste overflow fittings.
• Quick and easy installation.
• Manufactured in black Polypropylene.

Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.

• 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
• Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Suitable for domestic repair, maintenance and improvement to sinks and urinals.

• Contract range 40mm sink trap with wash machine spigot 76mm seal.
• Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
• Suitable for all sinks.
• Manufactured in polypropylene.

Shallow P-Trap for commercial or domestic use.

• Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
• Suitable for all baths.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Bath P-Trap for commercial or domestic use.

• Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
• Suitable for all baths.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Replacement straight nozzle for wash machine traps.

• Connection for washing or dishwasher machines discharge pipes
• Suitable for most McAlpine traps.
• Manufactured in polypropylene.

Replacement 135° nozzle for wash machine traps.

• Connection for washing or dishwasher machines discharge pipes
• Suitable for most McAlpine traps with 1" Bsp Thread.
• Manufactured in polypropylene.

Solution to plug the existing outlet hose spigot without the need of buying a new trap.

• Quick and simple installation.
• Suitable for most McAlpine traps.
• Manufactured in polypropylene.

Solution to plug the existing bath trap without the need of buying a new trap.

• Quick and simple installation.
• Suitable for 40mm McAlpine bath trap.
• Manufactured in polypropylene.

Multifit compression straight connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Multifit compression 90° bend connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Multifit compression swept tee connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Compression Multifit  Reducer 32-40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Compression flexible waste connector 290mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Plain spigot at one end to fit waste trap.
• Manufactured in polypropylene.
• Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.

Compression flexible waste connector 460mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Plain spigot at one end to fit waste trap.
• Manufactured in polypropylene.
• Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.

Traditional copper pipes for domestic and commercial installations above ground services.

• Highly durable, easy to work with and to install.
• Corrosion and ultraviolet resistant.
• Biostatic with excellent thermal conductivity.
• WRAS Approved, Conforms to - BS EN1057.

Great replacement for any worn or lost rubber olive on McAlpine compression connectors.

• Suitable for domestic repair, maintenance and improvement work.
• To fit only 40mm connectors.
• Conforms to BS EN 1329-1:2000.

Great replacement for any worn or lost plastic washer on McAlpine compression connectors.

• Suitable for domestic repair, maintenance and improvement work.
• To fit only 40mm connectors.
• Conforms to BS EN 1329-1:2000.

Washing machine trap complete with 0.6m upstand pipe and two clips is suitable for installation behind a washing machine when vertical drainage is required for waste water.

• McAlpine 75mm Water Seal Standpipe Trap with 1½" Multifit Outlet.1 ½"
• Suits all plastic to copper or lead pipe.
• Adjustable up to 750mm and can be cut to size.
• Conforms to BS EN 274-1:2002.

Deters rodents from entering the building through WC and prevents cross flow if fitted to back to back WC pans.

• For use with any rigid or flexible WC connector with 4"/110mm rubber outlet seal.
• Can be installed horizontally or vertically.
• Manufactured in black polypropylene to prevent light penetration.

B-I-N® is the ultimate shellac-based primer, sealer and stain killer. 

• Offers unparalleled adhesion on any surface without sanding and has the hiding power to conceal the toughest of stains. 
• Perfect for use on interior surfaces and spot priming of exterior surfaces.
• Permanently blocks odours. 
• Dries in 15 minutes.

Bulls Eye® 1-2-3 is classic universal interior and exterior, water-based, primer-sealer. 

• Offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.
• Effectively primes and seals a wide variety of interior and exterior surfaces. 
• Quick 30 minute drying time.

Perma-White® ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.

• Paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance.
• Bonds to existing solvent-based or glossy paints. 
• Seals flat paint, new drywall, cement block and concrete.

Zinsser Mould Killer and Remover effectively removes dark stains caused by mould, fungus and algae. It is ideal for use in bathrooms, kitchens and areas of high humidity.

• Removes mould prior to decorating.
• Ideal for tiles, plaster and wallpaper.
• Trigger spray for fiddly, hard-to-reach areas.