No products in the cart.
Tarkett Vylon Plus Floor Tiles 4.5m² Box
Popular with contractors Vylon Plus is a multi-purpose homogeneous vinyl floor and excellent value for money.
- Flexible and simple to work, easy to cut and lay.
- Ideal for both domestic and high traffic commercial areas such as schools, shops and healthcare facilities.
- With a classic soft pattern in 18 colours across sheet and tile.
- Vylon Plus has very low VOCs and uses leading Phthalate free technology for the best indoor air quality.
Tarkett SafeTred Universal Roll 2m x 20m (40m²)
Safetred Universal is anti-slip classic safety floor solution for any area that presents a risk of slips or falls.
- An anti-slip grip provides a high level of protection, while its reinforced surface protects against stains and eases maintenance.
- Slip-resistant R10 grip with reinforced surface for stain resistance.
- Wide choice of classic colours.
- Easy to clean and maintain.
- Also available in a convenient vinyl tile format for ease of transport and installation.
Tarkett SafeTred Spectrum Tiles 50cm 4m² Box
Safetred Spectrum is anti-slip classic safety floor solution for any area that presents a risk of slips or falls.
- An anti-slip grip provides a high level of protection, while its reinforced surface protects against stains and eases maintenance.
- Slip-resistant R10 grip with reinforced surface for stain resistance.
- Wide choice of classic colours.
- Easy to clean and maintain.
- Also available in a convenient vinyl tile format for ease of transport and installation.
Tarkett Goliath Vinyl Flooring Roll 2m x 19m (38m²)
Best contract range available in a choice of stone, mineral and wood designs;
- Super thick 4.5mm floor provide the ultimate barefoot comfort for living and sleeping spaces.
- Deeply cushioned and warm under your feet, our Goliath flooring absorbs noise to create a cosy home ambience.
- Easy to clean and maintain, good looking and comfortable.
- Goliath is the ideal floor for any part of your home.
- Tough, practical and hygienic in elegant wood, stone and concrete designs.
Skylo Side Entry Fill Valve ½"
The Skylo side entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a rotating float protected by a float shield meaning it can squeeze into the tightest cisterns.
- Compact
- 180 Degree Rotation Float
- Water Saving Delayed Fill
- Quiet Fill
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Basin Telescopic 'P' Trap 1.25" (32mm)
Water seal tubular 32mm basin trap with adjustable height, 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all basins.
- Manufactured in polypropylene.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Reducer 32-40mm
Compression Multifit Reducer 32-40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Flexible Waste Connector 290mm
Compression flexible waste connector 290mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Flexible Waste Connector 460mm
Compression flexible waste connector 460mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Multifit Rubber Olive 40mm
Great replacement for any worn or lost rubber olive on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.
Multifit Plastic Friction Washer 40mm
Great replacement for any worn or lost plastic washer on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.