No products in the cart.
Tetrion All Purpose Filler 5kg
Tetrion All Purpose Powder Filler is well known,high strength all purpose filler for inside and outside use.
- After mix ready to apply in one minute and dries in about one hour to a smooth sandable finish.
- Will not shrink or crack and is strong enough to accept nails and screws.
- Use on plaster, wood, masonry, concrete and brickwork.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Reducer 32-40mm
Compression Multifit Reducer 32-40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Flexible Waste Connector 290mm
Compression flexible waste connector 290mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Flexible Waste Connector 460mm
Compression flexible waste connector 460mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.
Multifit Rubber Olive 40mm
Great replacement for any worn or lost rubber olive on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.
Multifit Plastic Friction Washer 40mm
Great replacement for any worn or lost plastic washer on McAlpine compression connectors.
- Suitable for domestic repair, maintenance and improvement work.
- To fit only 40mm connectors.
- Conforms to BS EN 1329-1:2000.
Washing Machine Standpipe 1.5" (40mm)
Washing machine trap complete with 0.6m upstand pipe and two clips is suitable for installation behind a washing machine when vertical drainage is required for waste water.
- McAlpine 75mm Water Seal Standpipe Trap with 1½" Multifit Outlet.1 ½"
- Suits all plastic to copper or lead pipe.
- Adjustable up to 750mm and can be cut to size.
- Conforms to BS EN 274-1:2002.
Anti Cross-Flow & Rodent Barrier Valve
Deters rodents from entering the building through WC and prevents cross flow if fitted to back to back WC pans.
- For use with any rigid or flexible WC connector with 4"/110mm rubber outlet seal.
- Can be installed horizontally or vertically.
- Manufactured in black polypropylene to prevent light penetration.
Cross Cutting Saw Blade 165mm
Thinner, harder saw blade for a faster and cleaner cut.
- With laser cut expansion slots to prevent blade warp and precision tensioning for superior blade flatness.
- Super micrograin carbide tips with titanium for maximum sharpness, strength and durability.
- Perma shield coating combined with expansion slots to reduce heat, corrosion and resin build-up.
- Cross grain fine cutting.
- Size; 165 x 20mm,24 teeth.
Cross Cutting Saw Blade 190mm
Thinner, harder saw blade for a faster and cleaner cut.
- With laser cut expansion slots to prevent blade warp and precision tensioning for superior blade flatness.
- Super micrograin carbide tips with titanium for maximum sharpness, strength and durability.
- Perma shield coating combined with expansion slots to reduce heat, corrosion and resin build-up.
- Cross grain fine cutting.
- Size; 190 x 30mm,40 teeth.
2 Part High Performance Wood Filler Natural 550g
2 Part High Performance Wood Filler and catalyst for tough repairs to virtually any wood.
- Ultra-tough with no shrinking or cracking.
- Fills to any depth and can be drilled, screwed or planed.
- For interior and exterior use.