No products in the cart.
Steel Cranked Hinge 50mm (2")
Contract range light pattern steel fixed butt pin hinges in traditional pattern.
- Usually used for cupboard doors and cabinets.
- Stainless steel.
- 15-19mm Thickness installations.
Concealed Contract Cabinet Hinges 110° Pair
Cabinet hinges to allow door to swing open 110 degrees, easy to adjust for proper alignment.
- For kitchen,bedroom & bathroom cabinet doors.
- Great value contract hinges.
- Allows door to swing open 110 degrees, easy to adjust for proper alignment.
- Sold in sets of two hinges with pan-head mounting screws.
- Steel with bright nickel finish.
Concealed Cabinet Hinges 165° Pair
Cabinet hinges to allow door to swing open 165°, easy to adjust for proper alignment.
- For kitchen,bedroom & bathroom cabinet doors.
- Great value contract hinges.
- Sold in sets of two hinges with pan-head mounting screws.
- Steel with bright nickel finish.
Cruciform Mounting Plate
For use with slide on cabinet hinges.
- Hospa screw fixing.
- Height adjustment ±2 mm.
- Nickel plated Steel.
Steel Hasp and Staple 38 x 174 mm
A hasp and staple are designed to be used with a pin or a padlock to securely lock.
- Ideal for use on sheds, storage boxes or garden gates.
- When fastened all screw holes are covered.
- Simple & quick to install.
- Steel with black antique finish.
Hinge Repair Plates and Screws
Smart and quick solution or the damaged cabinet side holding hinge in place.
- Provides quick and reliable fix.
- Ideal for fixing new doors to an existing carcass.
- Bright zinc-plated.
Adjustable 2 Part 4 Leg pack
Plinth Foot Set, for 150 to 180 mm plinths heights, screw fixing.
- Adjustable part is black plastic base, and it can be rotated.
- The maximum adjustable height is about 150mm plinth height.
Double Locking Shower Height Adjuster for 25mm Rail
Double Locking facility to allow the handset to be adjusted separately to the rail adjustment.
- Fits 25mm diameter rails.
- Chrome design durable plastic.
- Made with WRAS approved Phthalate free materials.
Modular Aluminium Shower Curtain Corner Rod
Enables 4 types of rail configuration and installation.
- Quick and easy to install.
- Can be easily cut to length.
- Designed for corner applications.
- Available in white.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Reducer 32-40mm
Compression Multifit Reducer 32-40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Flexible Waste Connector 290mm
Compression flexible waste connector 290mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.