No products in the cart.
Tarkett Vylon Plus Floor Tiles 4.5m² Box
Popular with contractors Vylon Plus is a multi-purpose homogeneous vinyl floor and excellent value for money.
- Flexible and simple to work, easy to cut and lay.
- Ideal for both domestic and high traffic commercial areas such as schools, shops and healthcare facilities.
- With a classic soft pattern in 18 colours across sheet and tile.
- Vylon Plus has very low VOCs and uses leading Phthalate free technology for the best indoor air quality.
Tarkett SafeTred Universal Roll 2m x 20m (40m²)
Safetred Universal is anti-slip classic safety floor solution for any area that presents a risk of slips or falls.
- An anti-slip grip provides a high level of protection, while its reinforced surface protects against stains and eases maintenance.
- Slip-resistant R10 grip with reinforced surface for stain resistance.
- Wide choice of classic colours.
- Easy to clean and maintain.
- Also available in a convenient vinyl tile format for ease of transport and installation.
Tarkett SafeTred Spectrum Tiles 50cm 4m² Box
Safetred Spectrum is anti-slip classic safety floor solution for any area that presents a risk of slips or falls.
- An anti-slip grip provides a high level of protection, while its reinforced surface protects against stains and eases maintenance.
- Slip-resistant R10 grip with reinforced surface for stain resistance.
- Wide choice of classic colours.
- Easy to clean and maintain.
- Also available in a convenient vinyl tile format for ease of transport and installation.
Tarkett Goliath Vinyl Flooring Roll 2m x 19m (38m²)
Best contract range available in a choice of stone, mineral and wood designs;
- Super thick 4.5mm floor provide the ultimate barefoot comfort for living and sleeping spaces.
- Deeply cushioned and warm under your feet, our Goliath flooring absorbs noise to create a cosy home ambience.
- Easy to clean and maintain, good looking and comfortable.
- Goliath is the ideal floor for any part of your home.
- Tough, practical and hygienic in elegant wood, stone and concrete designs.
Inset Kitchen Sink 950 X 508mm
Inset stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Cut-out size 930mm x 488mm.
- Two tap hole with left or right hand installation.
- Dimensions: W;950mm, D;508mm, H;160mm.
Inset Reversible Drainer Kitchen Sink 950 X 508mm
Inset stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Cut-out size 930mm x 488mm.
- One tap hole with reversible drainer for universal installation.
- Dimensions: W;950mm, D;508mm, H;250mm.
Inset Shallow Kitchen Sink 950 X 508mm
Inset shallow bowl stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Shallow Bowl sink for installation with scarce space.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;120
- Dimensions: W;950mm, D;508mm, H;120mm.
Sit-On Contract Kitchen Sink 1000 X 500mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;500mm, H;160mm.
Sit-On Contract Kitchen Sink 1000 X 600mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;600mm, H;160mm.
Inset Double Bowl Reversible Sink 1160 x 508mm
Large Double Bowl reversible steel kitchen sink suitable for commercial & domestic use.
- Made from high-grade 18/10 stainless steel.
- Heavy duty sink will not bend or flex under pressure.
- One tap hole with reversible drainer for universal installation.
- Bowl Size; W;380 x D;355 x H;165
- Dimensions: W;1160mm, D;508mm, H;165mm.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Reducer 32-40mm
Compression Multifit Reducer 32-40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.