PlastiKote Multi Purpose Enamel Spray Paint incorporate a valve system that allows the can to be used at any angle without clogging, making them ideal for use in hard to reach areas, or when objects cannot be moved with ease.

• To be used for interior or exterior and is resistant against corrosion, chemicals, petroleum and UV light.
• Heat resistant to 121° C and is long-lasting, durable and incredibly versatile.
• Suitable for fibreglass, iron, masonry, metal, paper, plastic, steel, stone and wood.
• Drying time: touch dry in 20 - 30 minutes, thoroughly dry in 1 hour.

Internal plywood unfinished paint grade flush door ready to paint.

• An economical solution for both commercial and domestic properties.
• Lipped on the two long edges for ease of installation on refurbishment projects.
• 10 year manufacturer\'s guarantee.
• 35mm thickness.

This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• An economical solution for both commercial and domestic properties.
• 10 year manufacturer\'s guarantee.
• Ready to stain or paint with semi-solid core.
• 44mm thickness.

Internal plywood unfinished paint grade flush door ready to paint.

• An economical solution for both commercial and domestic properties
• Lipped on the two long edges for ease of installation on refurbishment projects.
• 10 year manufacturer\'s guarantee.
• 40mm thickness.

This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• An economical solution for both commercial and domestic properties.
• 10 year manufacturer\'s guarantee.
• Ready to stain or paint with semi-solid core.
• 44mm thickness.

This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• Solid core blank is a versatile door which can be used in a variety of scenarios.
• Door blank can be cut to accommodate different frame sizes.
• Solid core door blank ready to paint.
• 44mm thickness.

This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• This tough, practical plywood door is great for commercial properties and workshops.
• Solid core door ready to paint.
• Supplied without toughened wired glass.
• 44mm thickness.

The Skylo side entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a rotating float protected by a float shield meaning it can squeeze into the tightest cisterns. 

• Compact
• 180 Degree Rotation Float
• Water Saving Delayed Fill
• Quiet Fill

Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.

• Suitable for most sinks.
• Flexible waste overflow fittings.
• Quick and easy installation.
• Manufactured in black Polypropylene.

Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.

• Suitable for all baths.
• Flexible waste overflow fittings.
• Quick and easy installation.
• Manufactured in black Polypropylene.

Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.

• 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
• Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Water seal tubular 32mm basin trap with adjustable height, 76mm seal.

• Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
• Suitable for all basins.
• Manufactured in polypropylene.

Suitable for domestic repair, maintenance and improvement to sinks and urinals.

• Contract range 40mm sink trap with wash machine spigot 76mm seal.
• Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
• Suitable for all sinks.
• Manufactured in polypropylene.

Shallow P-Trap for commercial or domestic use.

• Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
• Suitable for all baths.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Bath P-Trap for commercial or domestic use.

• Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
• Suitable for all baths.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Replacement straight nozzle for wash machine traps.

• Connection for washing or dishwasher machines discharge pipes
• Suitable for most McAlpine traps.
• Manufactured in polypropylene.

Replacement 135° nozzle for wash machine traps.

• Connection for washing or dishwasher machines discharge pipes
• Suitable for most McAlpine traps with 1" Bsp Thread.
• Manufactured in polypropylene.

Solution to plug the existing outlet hose spigot without the need of buying a new trap.

• Quick and simple installation.
• Suitable for most McAlpine traps.
• Manufactured in polypropylene.

Solution to plug the existing bath trap without the need of buying a new trap.

• Quick and simple installation.
• Suitable for 40mm McAlpine bath trap.
• Manufactured in polypropylene.

Multifit compression straight connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Multifit compression 90° bend connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Multifit compression swept tee connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Compression Multifit  Reducer 32-40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Compression flexible waste connector 290mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Plain spigot at one end to fit waste trap.
• Manufactured in polypropylene.
• Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.