No products in the cart.
Numatic NRV240-11 Dry Vacuum Cleaner 9 Litre
With a huge 9 Litre capacity the NRV240-11 dry vacuum cleaner is a versatile workhorse packed full of tough and innovative features.
- The unique Airobrush provides a superb level of carpet care and is ideal for cleaning up pet hairs.
- The hard floor brush is a bonus when cleaning hard floor surfaces, just one part of the comprehensive accessories included.
- Professional specification brings a 10m power cable and 9L drum capacity, keeping you cleaning for longer.
Numatic Cleaner Bags 10Pack
Genuine Numatic Hepaflo Filter Dust Bags, suitable for most Henry and James models
- Type: NVM-1CH
- Includes 10x Dust Bags
Steel Cranked Hinge 50mm (2")
Contract range light pattern steel fixed butt pin hinges in traditional pattern.
- Usually used for cupboard doors and cabinets.
- Stainless steel.
- 15-19mm Thickness installations.
Concealed Contract Cabinet Hinges 110° Pair
Cabinet hinges to allow door to swing open 110 degrees, easy to adjust for proper alignment.
- For kitchen,bedroom & bathroom cabinet doors.
- Great value contract hinges.
- Allows door to swing open 110 degrees, easy to adjust for proper alignment.
- Sold in sets of two hinges with pan-head mounting screws.
- Steel with bright nickel finish.
Concealed Cabinet Hinges 165° Pair
Cabinet hinges to allow door to swing open 165°, easy to adjust for proper alignment.
- For kitchen,bedroom & bathroom cabinet doors.
- Great value contract hinges.
- Sold in sets of two hinges with pan-head mounting screws.
- Steel with bright nickel finish.
Cruciform Mounting Plate
For use with slide on cabinet hinges.
- Hospa screw fixing.
- Height adjustment ±2 mm.
- Nickel plated Steel.
Steel Hasp and Staple 38 x 174 mm
A hasp and staple are designed to be used with a pin or a padlock to securely lock.
- Ideal for use on sheds, storage boxes or garden gates.
- When fastened all screw holes are covered.
- Simple & quick to install.
- Steel with black antique finish.
Hinge Repair Plates and Screws
Smart and quick solution or the damaged cabinet side holding hinge in place.
- Provides quick and reliable fix.
- Ideal for fixing new doors to an existing carcass.
- Bright zinc-plated.
Adjustable 2 Part 4 Leg pack
Plinth Foot Set, for 150 to 180 mm plinths heights, screw fixing.
- Adjustable part is black plastic base, and it can be rotated.
- The maximum adjustable height is about 150mm plinth height.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit Reducer 32-40mm
Compression Multifit Reducer 32-40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Flexible Waste Connector 290mm
Compression flexible waste connector 290mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Plain spigot at one end to fit waste trap.
- Manufactured in polypropylene.
- Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.