No products in the cart.
Steel Cranked Hinge 50mm (2")
Contract range light pattern steel fixed butt pin hinges in traditional pattern.
- Usually used for cupboard doors and cabinets.
- Stainless steel.
- 15-19mm Thickness installations.
Concealed Contract Cabinet Hinges 110° Pair
Cabinet hinges to allow door to swing open 110 degrees, easy to adjust for proper alignment.
- For kitchen,bedroom & bathroom cabinet doors.
- Great value contract hinges.
- Allows door to swing open 110 degrees, easy to adjust for proper alignment.
- Sold in sets of two hinges with pan-head mounting screws.
- Steel with bright nickel finish.
Concealed Cabinet Hinges 165° Pair
Cabinet hinges to allow door to swing open 165°, easy to adjust for proper alignment.
- For kitchen,bedroom & bathroom cabinet doors.
- Great value contract hinges.
- Sold in sets of two hinges with pan-head mounting screws.
- Steel with bright nickel finish.
Cruciform Mounting Plate
For use with slide on cabinet hinges.
- Hospa screw fixing.
- Height adjustment ±2 mm.
- Nickel plated Steel.
Steel Hasp and Staple 38 x 174 mm
A hasp and staple are designed to be used with a pin or a padlock to securely lock.
- Ideal for use on sheds, storage boxes or garden gates.
- When fastened all screw holes are covered.
- Simple & quick to install.
- Steel with black antique finish.
Hinge Repair Plates and Screws
Smart and quick solution or the damaged cabinet side holding hinge in place.
- Provides quick and reliable fix.
- Ideal for fixing new doors to an existing carcass.
- Bright zinc-plated.
Adjustable 2 Part 4 Leg pack
Plinth Foot Set, for 150 to 180 mm plinths heights, screw fixing.
- Adjustable part is black plastic base, and it can be rotated.
- The maximum adjustable height is about 150mm plinth height.
Internal Ply Flush Door (Imperial Size)
Internal plywood unfinished paint grade flush door ready to paint.
- An economical solution for both commercial and domestic properties.
- Lipped on the two long edges for ease of installation on refurbishment projects.
- 10 year manufacturer\'s guarantee.
- 35mm thickness.
Internal 30 Min Fire Check Door FD30 (Imperial Size)
This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- An economical solution for both commercial and domestic properties.
- 10 year manufacturer\'s guarantee.
- Ready to stain or paint with semi-solid core.
- 44mm thickness.
Internal Ply Flush Door (Metric Size)
Internal plywood unfinished paint grade flush door ready to paint.
- An economical solution for both commercial and domestic properties
- Lipped on the two long edges for ease of installation on refurbishment projects.
- 10 year manufacturer\'s guarantee.
- 40mm thickness.
Internal 30 Min Fire Check Door FD30 (Metric Size)
This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- An economical solution for both commercial and domestic properties.
- 10 year manufacturer\'s guarantee.
- Ready to stain or paint with semi-solid core.
- 44mm thickness.
Plywood Solid Core Blank Fire Door FD30
This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- Solid core blank is a versatile door which can be used in a variety of scenarios.
- Door blank can be cut to accommodate different frame sizes.
- Solid core door blank ready to paint.
- 44mm thickness.
Plywood Flush Glazed FD60 Fire Door 2'6" (30")
This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- This tough, practical plywood door is great for commercial properties and workshops.
- Solid core door ready to paint.
- Supplied without toughened wired glass.
- 44mm thickness.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.