Popular with contractors Vylon Plus is a multi-purpose homogeneous vinyl floor and excellent value for money.

• Flexible and simple to work, easy to cut and lay.
• Ideal for both domestic and high traffic commercial areas such as schools, shops and healthcare facilities.
• With a classic soft pattern in 18 colours across sheet and tile.
• Vylon Plus has very low VOCs and uses leading Phthalate free technology for the best indoor air quality.

Tetrion All Purpose Powder Filler is well known,high strength all purpose filler for inside and outside use.

• After mix ready to apply in one minute and dries in about one hour to a smooth sandable finish.
• Will not shrink or crack and is strong enough to accept nails and screws.
• Use on plaster, wood, masonry, concrete and brickwork.

Safetred Universal is anti-slip classic safety floor solution for any area that presents a risk of slips or falls.

• An anti-slip grip provides a high level of protection, while its reinforced surface protects against stains and eases maintenance.
• Slip-resistant R10 grip with reinforced surface for stain resistance.
• Wide choice of classic colours.
• Easy to clean and maintain.
• Also available in a convenient vinyl tile format for ease of transport and installation.

Safetred Spectrum is anti-slip classic safety floor solution for any area that presents a risk of slips or falls.

• An anti-slip grip provides a high level of protection, while its reinforced surface protects against stains and eases maintenance.
• Slip-resistant R10 grip with reinforced surface for stain resistance.
• Wide choice of classic colours.
• Easy to clean and maintain.
• Also available in a convenient vinyl tile format for ease of transport and installation.

Best contract range available in a choice of stone, mineral and wood designs;

• Super thick 4.5mm floor provide the ultimate barefoot comfort for living and sleeping spaces.
• Deeply cushioned and warm under your feet, our Goliath flooring absorbs noise to create a cosy home ambience.
• Easy to clean and maintain, good looking and comfortable.
• Goliath is the ideal floor for any part of your home.
• Tough, practical and hygienic in elegant wood, stone and concrete designs.

Contract range light pattern steel fixed butt pin hinges in traditional pattern.

• Usually used for cupboard doors and cabinets.
• Stainless steel.
• 15-19mm Thickness installations.

Cabinet hinges to allow door to swing open 110 degrees, easy to adjust for proper alignment.

• For kitchen,bedroom & bathroom cabinet doors.
• Great value contract hinges.
• Allows door to swing open 110 degrees, easy to adjust for proper alignment.
• Sold in sets of two hinges with pan-head mounting screws.
• Steel with bright nickel finish.

Cabinet hinges to allow door to swing open 165°, easy to adjust for proper alignment.

• For kitchen,bedroom & bathroom cabinet doors.
• Great value contract hinges.
• Sold in sets of two hinges with pan-head mounting screws.
• Steel with bright nickel finish.

For use with slide on cabinet hinges.

• Hospa screw fixing.
• Height adjustment ±2 mm.
• Nickel plated Steel.

A hasp and staple are designed to be used with a pin or a padlock to securely lock.

• Ideal for use on sheds, storage boxes or garden gates.
• When fastened all screw holes are covered.
• Simple & quick to install.
• Steel with black antique finish.

Smart and quick solution or the damaged cabinet side holding hinge in place.

• Provides quick and reliable fix.
• Ideal for fixing new doors to an existing carcass.
• Bright zinc-plated.

Plinth Foot Set, for 150 to 180 mm plinths heights, screw fixing.

• Adjustable part is black plastic base, and it can be rotated.
• The maximum adjustable height is about 150mm plinth height.

DEWALT Corded Extreme Framing Circular Saw Blades have a thin cutting width to ensure that less push force is required by the user and that they cut straighter with reduced binding.

• The durable teeth stay sharp for a long time with reduced breakage.
• Can be used for ripping and cross-cutting natural timbers.
• Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard.
• Size; 165 x 20mm,24 teeth.

Designed for use with stationary machines or circular saws to cut softwoods and composite materials.

• The fast, smooth cutting action and durable construction make them ideal for demanding onsite operations.
• The wedge shoulder protects the carbide from nail impact.
• Size; 190 x 30mm,40 teeth.

\'Progressor\' Blade for fast cutting of different material thicknesses with a single blade.

• Will cut wood up to 65 mm thick and metals, pipes and profiles (inc aluminium) 3 -10 mm thick.
• Working length 75mm.

Dewalt reversible TCT tungsten carbide planer blades with two cutting edges.

• Produces a smooth, clean finish.
• Up to 20 times longer lasting than conventional HSS blades.
• Ideal for chamfering & rebating.
• Compatible with most 82mm planers.

Ideal for applications in wood, metal, plastic and dry wall.

• Extra hard Pozi 2 bits for extra long life and toughness.
• supplied in a handy storage case with bit holder.
• PZ2 type.
• Length 25mm.