No products in the cart.
Tetrion All Purpose Filler 5kg
Tetrion All Purpose Powder Filler is well known,high strength all purpose filler for inside and outside use.
- After mix ready to apply in one minute and dries in about one hour to a smooth sandable finish.
- Will not shrink or crack and is strong enough to accept nails and screws.
- Use on plaster, wood, masonry, concrete and brickwork.
Corner Stretcher Plate 25x25x38mm 10 PACK
Great for fixing and securing worktops to units, or units to walls.
- Stretcher plates allow the wood to slightly expand and contract.
- Measures 25mm x 28.5mm x 38mm.
- Galvanised Steel.
- Packs of 10.
Light Duty Corner Brackets 10pk
For specialist fixing applications;
- Cupboards, cabinets & drawers, builds, assemble & repair many types of furniture.
- Zinc-plated steel corner braces.
- Sizes available; 25x25, 40x40, 75x75 & 100x100mm.
- Supplied in a pack of 10.
Corner Brace 100mm
A light duty flat fitting corner bracket for general purpose joinery.
- Ideal for woodwork and timber framing.
- Zinc-plated steel corner mending plate.
- Supplied as single.
Mending Plate 75mm
A light duty flat fitting mending plate for general purpose joinery.
- Ideal for woodwork and timber framing.
- Zinc-plated steel mending plate.
- Supplied as single.
"T" Plate 75mm
A light duty flat fitting "T" plate for general purpose joinery.
- Ideal for woodwork and timber framing.
- Zinc-plated steel "T" plate.
- Supplied as single.
Inset Kitchen Sink 950 X 508mm
Inset stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Cut-out size 930mm x 488mm.
- Two tap hole with left or right hand installation.
- Dimensions: W;950mm, D;508mm, H;160mm.
Inset Reversible Drainer Kitchen Sink 950 X 508mm
Inset stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Cut-out size 930mm x 488mm.
- One tap hole with reversible drainer for universal installation.
- Dimensions: W;950mm, D;508mm, H;250mm.
Inset Shallow Kitchen Sink 950 X 508mm
Inset shallow bowl stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Shallow Bowl sink for installation with scarce space.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;120
- Dimensions: W;950mm, D;508mm, H;120mm.
Sit-On Contract Kitchen Sink 1000 X 500mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;500mm, H;160mm.
Sit-On Contract Kitchen Sink 1000 X 600mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;600mm, H;160mm.
Inset Double Bowl Reversible Sink 1160 x 508mm
Large Double Bowl reversible steel kitchen sink suitable for commercial & domestic use.
- Made from high-grade 18/10 stainless steel.
- Heavy duty sink will not bend or flex under pressure.
- One tap hole with reversible drainer for universal installation.
- Bowl Size; W;380 x D;355 x H;165
- Dimensions: W;1160mm, D;508mm, H;165mm.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Multifit 90° Bend Connector
Multifit compression 90° bend connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.