No products in the cart.
Standard Board Square Edge Plasterboard 2400 x 1200 x 12.5mm
The Knauf wallboard is high-quality plasterboard built with an ivory paper face for direct decoration or to deliver a perfect plaster finish.
- High purity gypsum core between two high quality paper liners.
- Suitable for installation with stud partitions, lining systems, ceilings.
- The ivory face of this wallboard is suitable for taping and jointing.
Gypsum Based Plasterboard Adhesive 25kg
Knauf gypsum based Plasterboard Adhesive is ideally used to apply direct to most masonry backgrounds and it\'s the fastest way to line your walls.
- For dotting and dabbing to brickwork and block walls
- Suitable for direct use with all types of plasterboard.
- Long-lasting high bond strength and reliability.
Corner Stretcher Plate 25x25x38mm 10 PACK
Great for fixing and securing worktops to units, or units to walls.
- Stretcher plates allow the wood to slightly expand and contract.
- Measures 25mm x 28.5mm x 38mm.
- Galvanised Steel.
- Packs of 10.
Light Duty Corner Brackets 10pk
For specialist fixing applications;
- Cupboards, cabinets & drawers, builds, assemble & repair many types of furniture.
- Zinc-plated steel corner braces.
- Sizes available; 25x25, 40x40, 75x75 & 100x100mm.
- Supplied in a pack of 10.
Corner Brace 100mm
A light duty flat fitting corner bracket for general purpose joinery.
- Ideal for woodwork and timber framing.
- Zinc-plated steel corner mending plate.
- Supplied as single.
Mending Plate 75mm
A light duty flat fitting mending plate for general purpose joinery.
- Ideal for woodwork and timber framing.
- Zinc-plated steel mending plate.
- Supplied as single.
"T" Plate 75mm
A light duty flat fitting "T" plate for general purpose joinery.
- Ideal for woodwork and timber framing.
- Zinc-plated steel "T" plate.
- Supplied as single.
Inset Kitchen Sink 950 X 508mm
Inset stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Cut-out size 930mm x 488mm.
- Two tap hole with left or right hand installation.
- Dimensions: W;950mm, D;508mm, H;160mm.
Inset Reversible Drainer Kitchen Sink 950 X 508mm
Inset stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Cut-out size 930mm x 488mm.
- One tap hole with reversible drainer for universal installation.
- Dimensions: W;950mm, D;508mm, H;250mm.
Inset Shallow Kitchen Sink 950 X 508mm
Inset shallow bowl stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Shallow Bowl sink for installation with scarce space.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;120
- Dimensions: W;950mm, D;508mm, H;120mm.
Sit-On Contract Kitchen Sink 1000 X 500mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;500mm, H;160mm.
Sit-On Contract Kitchen Sink 1000 X 600mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;600mm, H;160mm.
Inset Double Bowl Reversible Sink 1160 x 508mm
Large Double Bowl reversible steel kitchen sink suitable for commercial & domestic use.
- Made from high-grade 18/10 stainless steel.
- Heavy duty sink will not bend or flex under pressure.
- One tap hole with reversible drainer for universal installation.
- Bowl Size; W;380 x D;355 x H;165
- Dimensions: W;1160mm, D;508mm, H;165mm.
Sink Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for most sinks.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Basin Combination Trap/Waste 1.25" (32mm)
Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.
- 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
- Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Sink Telescopic Trap 1.5" (40mm)
Suitable for domestic repair, maintenance and improvement to sinks and urinals.
- Contract range 40mm sink trap with wash machine spigot 76mm seal.
- Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
- Suitable for all sinks.
- Manufactured in polypropylene.
Shallow Bath Trap 1.5" (40mm)
Shallow P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Bath "P" Trap 1.5" (40mm)
Bath P-Trap for commercial or domestic use.
- Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
- Suitable for all baths.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Nozzle For W/M Trap
Replacement straight nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
135° Nozzle For W/M Trap
Replacement 135° nozzle for wash machine traps.
- Connection for washing or dishwasher machines discharge pipes
- Suitable for most McAlpine traps with 1" Bsp Thread.
- Manufactured in polypropylene.
Blue Nozzle Plug for Appliance Trap
Solution to plug the existing outlet hose spigot without the need of buying a new trap.
- Quick and simple installation.
- Suitable for most McAlpine traps.
- Manufactured in polypropylene.
Blank Plug with Nut & Washer 1.5" (40mm)
Solution to plug the existing bath trap without the need of buying a new trap.
- Quick and simple installation.
- Suitable for 40mm McAlpine bath trap.
- Manufactured in polypropylene.
Compression Multifit Straight Connector
Multifit compression straight connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.