No products in the cart.
Active filters
- Availability: Not available
Sit-On Contract Kitchen Sink 1000 X 500mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;500mm, H;160mm.
Sit-On Contract Kitchen Sink 1000 X 600mm
Seat On stainless steel kitchen sink is made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Sit On sink for installation directly onto the kitchen unit.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;1000mm, D;600mm, H;160mm.
Inset Contract Kitchen Sink Pack 950 X 508mm
Contract range inset stainless steel kitchen sink pack supplied complete with pillar taps, waste and trap with W/M spigot.
- Made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
- Heavy duty sink will not bend or flex under pressure.
- Two tap hole with left or right hand installation.
- Bowl Size; W;420 x D;350 x H;160
- Dimensions: W;950mm, D;508mm, H;160mm.
Inset Double Bowl Reversible Sink 1160 x 508mm
Large Double Bowl reversible steel kitchen sink suitable for commercial & domestic use.
- Made from high-grade 18/10 stainless steel.
- Heavy duty sink will not bend or flex under pressure.
- One tap hole with reversible drainer for universal installation.
- Bowl Size; W;380 x D;355 x H;165
- Dimensions: W;1160mm, D;508mm, H;165mm.
Kaldewei Eurowa Bath Grips
Chrome twin bath grips to suit the Kaldewei Eurowa baths.
- Easy to fit.
- Safe grip.
Basin Plug & Ball Chain with Stay
Replacement plug & chain for wash hand basins.
- Basin Plug 38mm (1.1/2") & Ball Chain 305mm with Stay.
- Plug made from tough and durable plastic.
- Supplied in black only.
Sink/Bath Plug & Ball Chain 3/4"
Replacement plug & chain for sink or bath.
- Plug 44mm (1.1/2") & Ball Chain 456mm with hook.
- Plug made from tough and durable plastic.
- Supplied in black only.
Large"L" Shaped Curtain Track 762mm x 1829mm
Lightweight but strong aluminium rail system supplied in white with hooks, gliders and end brackets.
- Preformed "L" shape ideal for bend/corner installation and can be cut to size.
- Smooth running internal hook and glider system.
- Quick and Easy to Install.
- Size; 762mm x 1829mm.
Large"U" Shaped Curtain Track 762mm x 1829mm
Lightweight but strong aluminium rail system supplied in white with hooks, gliders and end brackets.
Preformed "U" shape ideal for bend installation and can be cut to size.
Smooth running internal hook and glider system.
Quick and Easy to Install.
Size; 762mm x 1829mm.
Bath Waste Kit with Plug & Chain 1.5" (40mm)
Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.
- Suitable for all baths.
- Flexible waste overflow fittings.
- Quick and easy installation.
- Manufactured in black Polypropylene.
Compression Multifit Swept Tee Connector
Multifit compression swept tee connector 32/40mm for domestic and commercial use.
- Suitable for all waste pipe connections.
- Manufactured in polypropylene.
- Conforms to BS EN 274-1:2002.
Compression Nut
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Compression Blanking Cap
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Disposable Dust Masks PK 5
Pack of five dust masks for protection against non toxic dusts and powders, mostly used in preparation for decoration work.
- Suitable only to reduce discomfort caused by exposure to coarse non-toxic particles where the concentration of the particles does not exceed the maximum permissible exposure.
- This is NOT a medical device or respiratory protective device and SHOULD NOT be used against fine particles, gases, vapours or paint sprays.
Air Stealth Half Mask Medium/Large
Half Mask protects the user against airborne particles, oil aerosols, mist, welds and fumes.
- Fitted with a twin HEPAC pleat encapsulated filter, that provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above.
- The exhalation valve is located at the bottom of the face piece, this helps to prevent exhalation fumes steaming or fogging glasses/visors.
- A protective grill covers 100% of filter surface.
- Conforms to half mask standard: BS EN 140.
Clear Wrap Around Safety Glasses
Clear safety glasses in wraparound design for maximum visibility and eye protection.
- Impact and scratch resistant polycarbonate lenses with lightweight frame.
- Ideal for use in the workshop or general DIY.
- Conforms to EN166.
Nitrile Coated Black Gloves
With a nitrile dipped palm and Level 4 abrasion resistance, the Supertouch Nitrotouch Gloves are the perfect choice for an array of medium work applications.
- Offer fantastic durability and comfort, and can even be washed to keep them in optimum condition for longer.
- Enhanced abrasion resistance for extra safety with good grip and secure fit.
- Supplied as a pair.
- EN 420:2003.
PU Coated Black Gloves
With a PU coating for extra grip, these gloves are ideal for precision tasks such as small scale assembly.
- Polyurethane palm coat with textured coating& & knitted wrist band.
- Conforms to EN 388 levels 3-1-2-1.
- Tested against EN 1149.
PAWA PG120 Nitrile Micro Foam Ultralight Gloves
The Pawa PG120 Ultralight Dexterous Nitrile Coated Handling Gloves are best performers within the precision handling industries.
- Superb dexterity, flexibility and sensitivity ensured by their 18 gauge nylon and Spandex liner.
- The gloves are designed using micro foam coating that offers exceptional 360° breathability for keeping the hands cool at work.
- PG120 are very comfortable handling gloves are well recommended for a wide range of handling tasks.
- EN 388:2016 Rating: 3121X.
Topaz Ice Protective Gloves
With a textured latex palm for superb grip, our versatile Topaz Ice gloves are ideal for a range of general handling and warehousing activities.
- Ideal for working in cold environment.
- Acrylic glove with ribbed knit wrist & fleece lining.
- Textured latex palm coating for added grip.
- EN 388 levels 1-1-3-1.
Foam Latex Gloves
With a textured latex palm for superb grip ideal for a range of general handling and clearance activities.
- Acrylic glove with ribbed knit wrist & fleece lining.
- Elasticated knit wrist for secure fit
- Approved to EN388:2003
Deflector 5X Cut Resistant Gloves
Deflector 5X gloves provide fantastic Cut 5 protection making them the perfect choice for a huge range of handling tasks.
- Light, flexible gloves offer exceptional comfort whilst protecting you from a host of hazards.
- Polyurethane palm coat with enhanced cut protection.
- Provide an impressive Cut Level 5 resistance.
- EN EN 388 levels 4-5-4-3
Powdered Industrial Latex Gloves 100PK
Exceptional fit teamed with fantastic sensitivity and dexterity.
- Available in industrial grade only.
- Powdered with corn starch certified free from GMO\'s.
- Micro textured and beaded cuff.
- Conforms to Industrial Grade - AQL 4.0.
Powderfree Industrial Latex Gloves 100PK
Incredibly popular due to their fantastic fit, sensitivity and versatility.
- Available in industrial grade only.
- Powder free and very low in latex proteins.
- Micro textured and beaded cuff.
- Conforms to Industrial Grade - AQL 4.0.