Blade with 7mm segment height for fast cutting and long life.

• Excellent cutting speed and blade life balance.
• For general building use on stone, concrete, pipes, brick, roof tiles, patio slabs and lintels.
• Wet or dry use. Optimum results if used wet.
• Manufactured and certified to EN13236.
• Size; 125 x 2 x 22.23mm

Continuous rim blade with 5mm segment height for smooth, clean cutting.

• Great for ceramic and natural stone tiles, and for prolonged cutting of all types of tile.
• Compatible with 22.23mm bore static tile cutting machines and angle grinders.
• Manufactured and certified to EN13236.
• Size; 115 x 22.23mm

Continuous rim blade with 5mm segment height for smooth, clean cutting.

• Great for ceramic and natural stone tiles, and for prolonged cutting of all types of tile.
• Compatible with 22.23mm bore static tile cutting machines and angle grinders.
• Manufactured and certified to EN13236.
• Size; 180 x 22.23mm.

Suitable for hardwood, softwood, chipboards and other composite materials.

• Hardened and strengthened for longer life.
• Size; 165 x 16 teeth,24 teeth,30 teeth.

Suitable for hardwood, softwood, chipboards and other composite materials.

• Hardened and strengthened for longer life.
• Size; 190 x 20 teeth,24 teeth,40 teeth.

For fast, straight cutting of softwood, timber sheet, plastic pipes and profiles.

• Bayonet fitting HCS blade with side-set milled teeth.
• Working length 75mm.

Reversible K20 tungsten carbide planer blades with two cutting edges.

• Produces a smooth, clean finish.
• Up to 20 times longer lasting than conventional HSS blades.
• Ideal for chamfering & rebating.
• Compatible with most 82mm planers.

Precision ground high-speed steel teeth with faster cutting and increased heat & wear resistance.

• Highly flexible with longer life.
• Made of steel M2.
• 300mm blade size with 18tpi.

Flexible stainless steel blades for use in preparation for all kinds of fillers.

• Ideal for all small mixing and filling jobs. 
• Supplied in four sizes of 50, 80, 100 & 120mm.

Ideal for mixing paint, filler, wallpaper paste, screed, mortar & plaster.

• For use with electric drills with a 8mm+ chuck.
• Powder-coated with carbon steel construction.
• 8mm hex shaft with 8cm stirrer diameter.

Heavy-duty cast aluminium level with milled base.

• Great to install kitchen units or where narrow spaces will allow for small level only.
• Suitable for checking the level of vertical and horizontal poles. 
• Accurate to 1mm/m. with 90° and 180° vials.

Rugged heavy-duty cast aluminium with magnetic milled base and protective ends. 

• Great to install kitchen units or where narrow spaces will allow for small level only.
• Allows hands-free use on steel surfaces. 
• Accurate to 1mm/m. with 45°, 90° and 180° vials

Manufactured from 1.2mm thick extruded aluminium with milled top and bottom faces, ribbed sides and protective end caps. 

• Box section width 59mm with hanging hole for storage. 
• Accurate to 1mm/m. with 45°, 90° and 180° vials.
• Supplied in 600mm, 900mm and 1200mm.

Rigid polyurethane foam construction for light, comfortable use over long periods. 

• Smooth, easy-clean surface.
• Lightweight & comfortable to use.

Grout float with 23mm EVA cushion and 5mm blue rubber base with bevelled edges and rounded front corners.

• Smooth, easy-clean surface.
• Lightweight & comfortable to use.

High quality hardened and tempered carbon steel blade with comfortable, soft-grip ergonomic handle. 

• Ideal for grabbing and flipping plaster onto walls.
• Smooth edges enable clean and flat application of plaster.
• Size 120mm x 280mm. 

High quality hardened and tempered carbon steel blade with comfortable, soft-grip ergonomic handle. 

• Ideal for applying floor and tile adhesive.
• Smooth edges enable clean and flat application of plaster.
• Size 120mm x 280mm. 

Designed for stripping and removing wallpaper, paint,varnish tiles, flooring, adhesives & sealant.

• Comfort grip handle allows for easy access of hard to reach areas.
• Angled head for easier scraping.
• Blades can be stored in handle.

Replacement blades for retractable and fixed blade knives.

• For use with utility knives, trimmers and scrapers.
• Housed in plastic storage case.

Hooked general purpose replacement blades for retractable and fixed blade knives.

• For use with utility knives, trimmers and scrapers.
• Used mostly for polysafe and vinyl flooring, felt and carpet cutting.
• Housed in plastic storage case.

Normal-duty snap-off blades with 11 segments per blade in safety dispenser.

• Use with 9, 18 & 25mm snap-off knives for general cutting and trimming.
• Made from hardened carbon steel for sharpness.
• Housed in plastic storage case.

Hardened steel scraper blades in plastic safety dispenser.

• Use with floor and wall scrapers for removal of dirt and grime.
• Housed in plastic storage case.

18mm & 9mm cutting knifes are ideal for the professional decorator or DIY enthusiast.

• High quality blades offers a quick and easy solution to tricky cuts.
• Safety lock with snap off blade sections.
• Ideal for cutting wallpaper,cuts through vinyl.

Bevel edged chisels fully forged from hardened and tempered carbon steel.

• Split proof polypropylene handles can be struck with a hammer or mallet.
• With blades guards.
• Supplied in sizes; 6, 19, 25 and 32mm.