Single thread multi-purpose woodscrews are perfect for a whole host of fixing needs.

• Ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.
• Single thread and special wax coating also increases speed and ease of insertion.
• Offers more corrosion resistance than zinc plated products thanks to additional passivation process.
• Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Single thread multi-purpose woodscrews are perfect for a whole host of fixing needs.

• Ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.
• Single thread and special wax coating also increases speed and ease of insertion.
• Offers more corrosion resistance than zinc plated products thanks to additional passivation process.
• Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Twin thread general-purpose woodscrews ideal for a range of fixing applications.

• Ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.
• Extra deep insert bit recess allows a quicker and easier insertion, which enables a firmer positive drive.
• Twin thread and special wax coating also increases speed and ease of insertion.
• Twin thread provides increased holding power.

Twin thread general-purpose woodscrews ideal for a range of fixing applications.

• Ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.
• Extra deep insert bit recess allows a quicker and easier insertion, which enables a firmer positive drive.
• Twin thread and special wax coating also increases speed and ease of insertion.
• Twin thread provides increased holding power.

Twin thread general-purpose woodscrews ideal for a range of fixing applications.

• Ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.
• Extra deep insert bit recess allows a quicker and easier insertion, which enables a firmer positive drive.
• Twin thread and special wax coating also increases speed and ease of insertion.
• Twin thread provides increased holding power.

Twin thread general-purpose woodscrews ideal for a range of fixing applications.

• Ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.
• Extra deep insert bit recess allows a quicker and easier insertion, which enables a firmer positive drive.
• Twin thread and special wax coating also increases speed and ease of insertion.
• Twin thread provides increased holding power.

Anti-split - Fast drive elite performance woodscrews.

• Elementech 400 surface coating provides corrosion resistance.
• Lasts up to 6 times longer than standard zinc screw protective coating.
• Double cutting point reduces splitting and drive time.
• Capable of penetrating 0.8mm steel.
• Serrated cutting reduces torque for a faster firmer fix.
• Anti friction prevents jacking, rotation and splitting.

Anti-split - Fast drive elite performance woodscrews.

• Elementech 400 surface coating provides corrosion resistance.
• Lasts up to 6 times longer than standard zinc screw protective coating.
• Double cutting point reduces splitting and drive time.
• Capable of penetrating 0.8mm steel.
• Serrated cutting reduces torque for a faster firmer fix.
• Anti friction prevents jacking, rotation and splitting.

Professional choice organiser of Anti-split - Fast drive elite performance woodscrews.

• Elementech 400 surface coating provides corrosion resistance.
• Lasts up to 6 times longer than standard zinc screw protective coating.
• Double cutting point reduces splitting and drive time.
• Capable of penetrating 0.8mm steel.
• Serrated cutting reduces torque for a faster firmer fix.
• Anti friction prevents jacking, rotation and splitting.

Coarse thread specialist drywall screws - black phosphate with phillips drive head.

• Specialist Screws for drywall applications.
• Used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding.
• Screws are made from fully hardened C1022 steel.
• Extra deep insert bit recess offering a firmer positive drive.
• Extremely sharp piercing point.
• Thread gives speedy insertion and improved holding power.

Coarse thread specialist drywall screws - black phosphate with phillips drive head.

• Specialist Screws for drywall applications.
• Used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding.
• Screws are made from fully hardened C1022 steel.
• Extra deep insert bit recess offering a firmer positive drive.
• Extremely sharp piercing point.
• Thread gives speedy insertion and improved holding power.

Specially designed self-tapping masonry fixing that are widely used for batten, window and door frame fixing.

• Virtually stress free, allowing close to edge applications.
• Torx compatible head screw for increased torque control.
• High load capacity with interlocking thread into base material.
• Through fixing, eliminating the need for marking and re-positioning.
• Suitable for most masonry subtrates including concrete and brickwork.

Designed for fixing cladding and sheet metal to light and heavy structural purlins as used when constructing industrial units.

• Roofing Screws- Steel to Steel or Steel Sheet to Steel Purlin.
• Hexagon Self-Drilling Head.
• \'Elementech\' coating for superior anti-corrosion - salt spray tested to 1000 hours.
• The 16mm rubber washer beneath the aluminium flange expands under pressure and forms a permanent weather-seal.

Designed for fixing cladding and sheet metal to light and heavy structural purlins as used when constructing industrial units.

• Roofing Screws- Steel to Steel or Steel Sheet to Steel Purlin.
• Hexagon Self-Drilling Head.
• \'Elementech\' coating for superior anti-corrosion - salt spray tested to 1000 hours.
• The 16mm rubber washer beneath the aluminium flange expands under pressure and forms a permanent weather-seal.

Designed specifically for use when fitting sinks and basins.

• Sanitary Ware Fixing Kit - Medium duty decorative fixing.
• Strong, reliable and durable -Easy to fit for push through fixing.
• Zinc screw has a hexagon nut and part flat shank allowing straight foward installation.
• Decorative cap leaves an attractive easy to clean finish.
• Edge of plug cleanly closes off drill hole in porcelain enabling the cap to snap fit securely.

Designed specifically for use when fitting WC\'s.

• Strong, reliable and durable -Easy to fit for push through fixing.
• Zinc screw has a hexagon nut and part flat shank allowing straight foward installation.
• Decorative cap leaves an attractive easy to clean finish.
• Edge of plug cleanly closes off drill hole in porcelain enabling the cap to snap fit securely.

Internal plywood unfinished paint grade flush door ready to paint.

• An economical solution for both commercial and domestic properties.
• Lipped on the two long edges for ease of installation on refurbishment projects.
• 10 year manufacturer\'s guarantee.
• 35mm thickness.

This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• An economical solution for both commercial and domestic properties.
• 10 year manufacturer\'s guarantee.
• Ready to stain or paint with semi-solid core.
• 44mm thickness.

Internal plywood unfinished paint grade flush door ready to paint.

• An economical solution for both commercial and domestic properties
• Lipped on the two long edges for ease of installation on refurbishment projects.
• 10 year manufacturer\'s guarantee.
• 40mm thickness.

This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• An economical solution for both commercial and domestic properties.
• 10 year manufacturer\'s guarantee.
• Ready to stain or paint with semi-solid core.
• 44mm thickness.

This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• Solid core blank is a versatile door which can be used in a variety of scenarios.
• Door blank can be cut to accommodate different frame sizes.
• Solid core door blank ready to paint.
• 44mm thickness.

This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.

• This tough, practical plywood door is great for commercial properties and workshops.
• Solid core door ready to paint.
• Supplied without toughened wired glass.
• 44mm thickness.

Spare tungsten carbide-tipped (TCT) saw blade suitable for marble, granite, glass, ceramic, hard tile, concrete and brick.

• Compatible with GMC Compact Plunge Saw.
• Manufactured and certified to EN13236.
• Size; 110 x 22.23 x 2mm x 9T.

For professional drilling in concrete and masonry.

• Tungsten carbide tip offers fast, easy drilling.
• Shot-peined finish which hardens the surface of the bit and also helps to eliminate stress fractures.
• Fully hardened (HRC 48) chrome-alloy steel body ensures long bit life and minimises breakage.
• Drills clean, accurate fixing and clearance holes.