P65 Foam Gun gives the user more control to apply the foam precisely in hard to reach places, saving unnecessary wastage.

• Sprung trigger mechanism and Micro-fast foam flow adjustment system.
• Clean even bead for the accurate installation of the foam and to help reduce waste.
• Fully coated non-stick body, a non-stick coated needle and canister fitting valve and a stainless steel barrel.

404 Fungicidal Wash is a powerful, fungicidal wash which is effective on most surfaces.

• For the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc.
• Kills mould growth on roofs prior to coating with bituminous coatings.
• Leaves a residual surface to help prevent further infestation.
• Kills mould caused by damp on internal and external floors and walls.

Everflex 200 Contractors LMA Silicone is a contractor’s grade acetoxy cure silicone sealant for general weatherproofing, sanitary and gap-sealing applications.
Anti-fungal formula.
Permanently flexible with Quick curing.
Suitable as an adhesive for fixing PVCu trims, cladding and panels.

Sikaflex® EBT+ is a multi-purpose one part, elastic, polyurethane adhesive, sealant & filler.

• It bonds to all common building materials, is permanently elastic and has excellent grab and gap filling properties.
• Ideal for use in a wide range of building and maintenance situations.
• For bonding and fixing cabinets, mirrors and ceramics, bonding and sealing flashings, roof tiles and acoustic tiles, filling internal and external cracks, forming gaskets in ducting and more.

Anchorset Green 300 is a styrene free chemical anchor that features an easy to use twin bag system operated by a standard sealant gun.

• Perfect solution for builders of all skill levels.
• Great for satellite dish mountings, gate hinges, balcony rails etc.
• Rapid curing system.
• Styrene free, low odour.

Spare catalyst/hardener tubes for use with all 2 part wood fillers.

• Solvent free non-staining.
• Over paintable when cured.
• For interior use.

All Purpose Filler is an easy to use ready mixed filler which is suitable for both interior and exterior use.

• Ready mixed formula - apply straight from tub.
• Dries to a smooth but tough crack resistant sandable finish which may be painted, papered or stained.
• The product is designed for indoor or outdoor repairs.
• For plaster, plasterboard, brick, render, wood, stone and most other building materials.

Handy replacements with screw cap to prevent silicone from leaking out, keeps caulking job clean, and prevent air getting in, increases the life of remaining silicone.

• Will fit most standard cartridges.
• Strong and versatile plastic.
• For silicone, sealant, mastic and caulk, suitable for standard EU3 cartridges.

The Strip-Out Tool is a unique patented tool which works on any type of sealant.

• Incredibly simple and its design and shape provides a really quick way to strip all types of sealant out of any 90° angle joint.
• For use before applying new silicone sealant!

The Smooth-Out tool is a unique tool that is ideal for smoothing out all sealants after application – it creates a perfect seal every time.

• You will have no edge marks and no mess!
• Tool is really remarkable, once someone has used it they will never seal again without it.
• Quick and easy job application.

All Purpose Weatherproof Wood Adhesive is a high quality, resin-based wood adhesive for all wood bonding applications.

• It can be used internally and externally and provides a high strength, impact-resistant bond that is usually stronger than the wood itself.
• Dries clear and have High degree of water resistance.
• Excellent bond strength with rapid curing – initial set in just 10 minutes
• Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use.

Mitre Fast Bonding Kit is a two-part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator.

• Mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives.
• Suitable for bonding of MDF, rubber, PVCu, metals etc.
• Economical in use & bonds within 10 seconds.
• High viscosity adhesive – low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces.

PVCu Solvent Cleaner is a solvent based product formulated to remove ingrained dirt and stains from PVCu and most plastics.

• Suitable to restore an “as new” look to old windows and plastic garden furniture.
• Ideal solution for every day grime on UPVC surfaces.
• Removes ingrained dirt.

PVCu Cream Cleaner is a solvent-free formulation designed to remove ingrained dirt, stains and pollution from PVCu window frames without scratching.

• Buffs to a deep sheen and removes ingrained dirt.
• Suitable to restore an “as new” look to old windows and plastic garden furniture.
• Ideal solution for every day grime on UPVC surfaces.

Water Resistant Tile Adhesive is a premium grade adhesive.

• Can be used in areas subject to prolonged/permanent wet conditions and in areas of high humidity and condensation.
• May be used in domestic showers when used in conjunction with Super White Powder Wall Tile Grout.
• Tested to EN12004 type D2T.
• Excellent water resistance & high bond strength.

Rapid Set Flexiplus is a quick setting floor and wall tile mortar with added latex powder for improved flexibility.

• Can be used on prepared wooden floors, interior and exterior use where same day fixing and grouting is required.
• Suitable for porcelain and large format tiles on walls.
• Rapid set - same day fixing and grouting.
• Tested to EN12004 Class C2FTE S1.

Incredible Silicone Self Fusing Tape Silweld is the incredible new tape that can be used to repair almost anything from an emergency repair to a water hose or air pipe to insulating electrical wires or connections.

• It creates an air tight, watertight seal in seconds without the need for any adhesive and it even works under water!
• Silweld is an excellent electrical insulator up to 8,000 volts.
• Withstands extreme temperatures from -65 to 260ºC and even withstands pressure to 700psi.
• Silweld also resists petrol, oils, acids, solvents, salt water and UV rays.
• It is so diverse that it can be used for permenant or temporary repairs to just about anything:
• All pipes and hoses.

The Skylo side entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a rotating float protected by a float shield meaning it can squeeze into the tightest cisterns. 

• Compact
• 180 Degree Rotation Float
• Water Saving Delayed Fill
• Quiet Fill

Standard 1.1/2" Sink Waste Kit complete with all parts including a round overflow, poly plug and chain.

• Suitable for most sinks.
• Flexible waste overflow fittings.
• Quick and easy installation.
• Manufactured in black Polypropylene.

Standard 1.1/2" Bath Waste Kit complete with all parts including a round overflow, poly plug and chain.

• Suitable for all baths.
• Flexible waste overflow fittings.
• Quick and easy installation.
• Manufactured in black Polypropylene.

Water seal tubular basin trap combined with basin waste, makes the trap suitable for all domestic repair, maintenance and improvement work.

• 1 1/4 inch multifit compression outlet suits all plastic, copper and lead pipe.
• Complete with 60mm polished stainless steel waste flange, centre pin fixing,dry jointing washers, plug, CP chain and stay.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Water seal tubular 32mm basin trap with adjustable height, 76mm seal.

• Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
• Suitable for all basins.
• Manufactured in polypropylene.

Suitable for domestic repair, maintenance and improvement to sinks and urinals.

• Contract range 40mm sink trap with wash machine spigot 76mm seal.
• Rubber ‘O’ ring and a slip ring to give a secure compression water tight seal.
• Suitable for all sinks.
• Manufactured in polypropylene.

Shallow P-Trap for commercial or domestic use.

• Rubber ‘O’ ring and a slip ring to give a secure water tight seal.
• Suitable for all baths.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.