No products in the cart.
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Solvent Waste Pipe 3m White
White strong ABS waste pipe for carrying waste of the property.
- Lightweight and strong cost-effective option.
- Simple to handle and install with solvent cement.
- Can be used in domestic and commercial use.
Solvent Weld Straight Coupling
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Knuckle Bend 90°
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Solvent Weld Tee
Waste solvent system can be used in domestic and commercial use.
- Lightweight and versatile enough to be used for a wide range of applications.
- Installation is easy and comfortable for simple or challenging surfaces, due to the solvent weld connection type.
- Supplied in white only.
Expert Range Spirit Level
Manufactured from 1.2mm thick extruded aluminium with milled top and bottom faces, ribbed sides and protective end caps.
- Box section width 59mm with hanging hole for storage.
- Accurate to 1mm/m. with 45°, 90° and 180° vials.
- Supplied in 600mm, 900mm and 1200mm.
MultiMax Drill Bit 6.0 X 200mm
The Forgemaster Multi Max Drill Bits have a specially designed diamond ground tungsten carbide tip and have been heat treated for an increased life span.
- The triangular shank stops slippage in the drill chuck, thus increasing speed and efficiency.
- Universal drill bit can drill through multi-substrates in one go, effortlessly.
- The drill bit is suitable for use with or without the hammer setting.