No products in the cart.
Panel Pins Bright 40mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Panel Pins Bright 25mm
Multi-purpose Panel Pins suitable for use with both soft and hard woods.
- Specialist head shape helps to prevent splitting of hard or brittle timber.
- Head can sink below surface of timber enabling easy sanding and filling.
- Versatile, ideal for use in most lightweight and decorative tasks.
- Often used when fixing door trims, coving and beading.
Annular Ring Shank Nails 20mm
Multi-purpose nails suitable for use with both soft and hard woods.
- Suitable for use with both soft and hard woods.
- Ideal when permanent strength and holding power are of primary importance.
- Rings on shank are sloped in a conical shape to ensure clean insertion but design ensures difficulty in release.
- Often used to fix hardboard sheeting to floorboards, offering a strong secure fixing.
Euro 6pin Double Cylinder NP
Anti drill and anti pick lock, ideal where controlled access is needed from both sides of the lock.
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available: 70mm, 80mm, 90mm.
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Rigid uPVC Angle 25mm x 25mm
Used in wide range of applications; bath panel corners, plinth corners or cabinets,corner guards, wall protection, stair nosing, hiding screw holes.
- 100 % Waterproof tough and durable plastic.
- Ideal for Kitchens & Bathrooms.
- Can be used as a Internal or External Corner.
- Will not fade and last a life time.
- Can easily be cut without any special tools.
End Feed Metric to Imperial Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For conversion installation from Metric to Imperial size and vice versa.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Bent Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Straight Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
Compression Coupler M1
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation from Imperial to Metric.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 300mm
Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 500mm
Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.