Spear-headed tungsten carbide-tipped drill with 6mm (1/4") hex shank.
For clean, accurate holes in ceramic tiles, glass and mirrors.
Low drill pressure and frequent lubrication optimizes results.

Spear-headed tungsten carbide-tipped drills with 5,6 & 8mm hex shank.

• For clean, accurate holes in ceramic tiles, glass and mirrors.
• Low drill pressure and frequent lubrication optimizes results.
• Size supplied; 5, 6 & 8mm.

Titanium coated for a longer life. For drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass.

• Precision ground point and shoulders for a superior clean cut and reduced splintering.
• Hex shank for quick change, for use with drills, drivers and hand braces.
• Fully hardened high carbon steel tri-point bit.

Fully hardened and tempered for drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass.

• Precision ground point and shoulders for a superior clean cut and reduced splintering.
• Hex shank for quick change, for use with drills, drivers and hand braces.
• Angled cutting edges give faster cleaner cutting.  
• Sizes: 10, 12, 16, 18, 20, 25mm.

Fine pitch spiral pulls auger into workpiece and single spur slices timber ahead of the cutting edge, for accurate holes.

• Precision ground, hardened high carbon steel hex shank auger bit.
• Deep, auger-style flutes ensure rapid drilling.
• Size supplied;  25 x 235mm & 25 x 450mm.

Made of hardened and tempered drop forged steel.

• Suitable for removing wall and floor tiles, splitting bricks or concrete.
• Ideal for use with any SDS machine.

Adjustable tube cutter with high-quality, hardened and tempered steel cutting wheel and double rollers.

• Requires minimal swing around the tubing, for use in extremely tight spaces.
• Cuts copper, brass and aluminium tube.
• Corrosion-resistant finish with cutting capacity 3 - 22mm.

Corrosion-resistant polished brass keys for air vents to release air from water-filled radiators.

• Clock-type key handle for easy turning.
• Compatible with most radiator bleed valves.

Nickel-plated steel, self-locking pliers.

• Quick release screw and lever adjustment with curved jaw with wire cutter.
• Guarded release enables easy opening and prevents accidental release.
• Hex key adjustment allows even slower release for more control.
• High gripping power with no slipping and asy screw adjustment for controlled grip.

Heavy duty chrome vanadium with hardened jaws and soft-grip vinyl handles, multi-step adjustment.

• Made from hardened and tempered chrome vanadium steel material.
• Hardened jaws achieving excellent gripping performance.
• Ergonomic cushion-grip handles, ensuring greater comfort and less hand fatigue.

High quality carbon steel, drop forged for durability.

• Chrome plated finish for corrosion protection.
• Max jaw opening: 31mm.

Heavy duty drop-forged steel with knurled thumbscrew adjustment.

• Firm, fast self-clamping secures hold on the smoothest pipework.
• Corrosion-resistant, rippled powder coating.
• For use on pipework and fittings.

Hardened steel jaws and adjustable pivot head for hard to reach bath and basin tap nuts.

• Fits 1/2" and 3/4" nuts.
• Length 280mm.

Forged single-piece steel with octagonal shaft and hardened and tempered blade, and shock-absorbing hand guard.

• Shapes, splits and chips bricks, stone and other masonry materials.
• Corrosion-resistant durable painted finish.

Forged steel polished head with tubular steel shaft and heavy duty rubber grip.

• Weather-resistant chrome-plated steel shaft.
• 16oz (454 g).

Wrecking crowbar normally used for dismantling timber work, plasterboard and pulling up floorboards and so on.

• Solid forged, hardened and tempered from hexagonal steel.
• Angled chisel end for leverage and claw with integrated nail puller.
• Powder-coated with ground claw and chisel.
• For general wrecking and demolition work.

Wrecking crowbar normally used for dismantling timber work, plasterboard and pulling up floorboards and so on.

• Solid forged, hardened and tempered from hexagonal steel.
• Angled chisel end for leverage and claw with integrated nail puller.
• Powder-coated with ground claw and chisel.
• For general wrecking and demolition work.

Sturdy steel gun with impact pressure adjustment lock.

• Adjustable power control allows for precise control and lock down handle allows for safe storage.
• Suitable for 4-14mm staples, 10-12mm U staples & 10-14mm nails.
• Comes with 200: 12mm U staples, 10mm nails and 8mm staples in plastic storage case.

1/2" x 20 UNF thread enables you to hold conventional bits in an SDS drill.

• Suitable for cordless and AC hammer action drills.
• Supplied with SDS plus adaptor and chuck key.
• 2-13mm capacity.

For general routing, grooving, rebating, dados, mortising and edge trimming.

• Strong, hardened steel shank.
• Twin fluted for smooth finish.
• TCT cutting edges.
• Max 24,000rpm.

For general routing, grooving, rebating, dados, mortising and edge trimming.

• Strong, hardened steel shank.
• Twin fluted for smooth finish.
• TCT cutting edges.
• Max 24,000rpm.

Chrome vanadium 6150 steel bits supplied in a handy storage case.

• 1/4" hex drive.
• PH2 type.
• Length 25mm.

Active (non-latching) plug-in 13A/3200W residual current device (RCD) to prevent electric shock from faulty mains devices or water ingress.

• Active type is recommended for power tool use to prevent unexpected starting.
• Easy plug-in design for convenience and portability.
• Large reset and test buttons plus power indicator.
• Suitable for use with UK 13A mains sockets.
• Operating current 30mA with 30ms or less trip speed.
• CE tested and certified.

Portable 10W LED site light with handy 1 Amp output USB port for phone charging and other USB-powered devices.

• Useful for emergencies or general site works with 700 Lumens and 4400mAh Lithium battery.
• Aluminium casing. IP44 rated.
• Includes 240V and 12/24V charger.