No products in the cart.
Door & Board Lifter 300mm
Allows exact positioning of door or board while fixing.
- Lightweight with strong aluminium construction.
- Keeps both hands free with lone installation.
Carpenters Pencils & Sharpener Set 13pce
Soft-lead oval-section carpenters pencils for marking timber, brick, stone and other building materials.
- Draws thick or thin lines on both rough and smooth surfaces.
- Purpose designed sharpener creates a sharp point quickly and easily.
Expert Mitre Box 300 x 90mm
Expert mitre guide to achieve a professional finish at different angles.
- 3 holes for fixing onto a work bench or convenient surface.
- Made from moulded plastic.
3pcs Titanium-Coated HSS Step Drill Set
Self-starting step drill with storage wallet for precision drilling of sheet metals, alloys and plastics up to 4mm thick.
- Clearly-marked 2mm graduations.
- Quick-change 6.35mm (1/4") hex shank.
- Sizes; 1/8"-1/2", 3/16"-1/2" and 1/4"-3/4".
2pk HSS Titanium-Coated Drill Bits 3.2mm
Perfect for drilling through the cylinders on forced entry jobs.
- For aluminium, steel, plastic, wood and non-ferrous metals.
- Titanium-coated for extended life and fast bit penetration.
- Ground twist high speed steel.
Tile & Glass Drill Bit Hex Shank 6mm
Spear-headed tungsten carbide-tipped drill with 6mm (1/4") hex shank.
For clean, accurate holes in ceramic tiles, glass and mirrors.
Low drill pressure and frequent lubrication optimizes results.
Tile & Glass Drill Bit Hex Shank 3pce Set
Spear-headed tungsten carbide-tipped drills with 5,6 & 8mm hex shank.
- For clean, accurate holes in ceramic tiles, glass and mirrors.
- Low drill pressure and frequent lubrication optimizes results.
- Size supplied; 5, 6 & 8mm.
Titanium-Coated Flat Bit
Titanium coated for a longer life. For drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass.
- Precision ground point and shoulders for a superior clean cut and reduced splintering.
- Hex shank for quick change, for use with drills, drivers and hand braces.
- Fully hardened high carbon steel tri-point bit.
Auger Bit 25mm
Fine pitch spiral pulls auger into workpiece and single spur slices timber ahead of the cutting edge, for accurate holes.
- Precision ground, hardened high carbon steel hex shank auger bit.
- Deep, auger-style flutes ensure rapid drilling.
- Size supplied; 25 x 235mm & 25 x 450mm.
Mini Tube Cutter 3 - 22mm
Adjustable tube cutter with high-quality, hardened and tempered steel cutting wheel and double rollers.
- Requires minimal swing around the tubing, for use in extremely tight spaces.
- Cuts copper, brass and aluminium tube.
- Corrosion-resistant finish with cutting capacity 3 - 22mm.
Brass Clock-Type Radiator Bleed Keys 2pk
Corrosion-resistant polished brass keys for air vents to release air from water-filled radiators.
- Clock-type key handle for easy turning.
- Compatible with most radiator bleed valves.
Self Locking Pliers 220mm
Nickel-plated steel, self-locking pliers.
- Quick release screw and lever adjustment with curved jaw with wire cutter.
- Guarded release enables easy opening and prevents accidental release.
- Hex key adjustment allows even slower release for more control.
- High gripping power with no slipping and asy screw adjustment for controlled grip.
Heavy Duty Water Pump Plier 250mm
Heavy duty chrome vanadium with hardened jaws and soft-grip vinyl handles, multi-step adjustment.
- Made from hardened and tempered chrome vanadium steel material.
- Hardened jaws achieving excellent gripping performance.
- Ergonomic cushion-grip handles, ensuring greater comfort and less hand fatigue.
Heavy Duty Pipe Wrench 355mm (14")
Heavy duty drop-forged steel with knurled thumbscrew adjustment.
- Firm, fast self-clamping secures hold on the smoothest pipework.
- Corrosion-resistant, rippled powder coating.
- For use on pipework and fittings.
Adjustable Basin Wrench 280mm
Hardened steel jaws and adjustable pivot head for hard to reach bath and basin tap nuts.
- Fits 1/2" and 3/4" nuts.
- Length 280mm.
Combination Plier 180mm
ControlGrip™ Combination Pliers are made from forged carbon steel with an induction hardened blade and tempered jaws for long life.
- Precision milled cutting edges and pivot for smooth opening and closing of the jaws.
- All exposed steel surfaces have been sanded and are protected against corrosion.
- With a bi-material, ergonomically designed handle that is easy to hold, even with oily hands.
- The zone configuration provides added power, comfort and control.
Stanley Diagonal Cutting Plier 150mm
ControlGrip™ Combination Pliers are made from forged carbon steel with an induction hardened blade and tempered jaws for long life.
- Precision milled cutting edges and pivot for smooth opening and closing of the jaws.
- All exposed steel surfaces have been sanded and are protected against corrosion.
- With a bi-material, ergonomically designed handle that is easy to hold, even with oily hands.
- The zone configuration provides added power, comfort and control.
Aviation Snip Straight Cut 250mm (10")
Cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic.
- The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip.
- Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting.
- High leverage compound cutting action snips made from forged alloy steel.
Bolster Chisel with Guard 75 x 220mm
Forged single-piece steel with octagonal shaft and hardened and tempered blade, and shock-absorbing hand guard.
- Shapes, splits and chips bricks, stone and other masonry materials.
- Corrosion-resistant durable painted finish.
Tubular Shaft Claw Hammer 16oz
Forged steel polished head with tubular steel shaft and heavy duty rubber grip.
- Weather-resistant chrome-plated steel shaft.
- 16oz (454 g).
Fiberglass Curved Claw Hammer 16oz
This Stanley Curved Claw Hammer has a lightweight design with a long handle for improved performance and less user fatigue.
- The handle has a fibreglass core that adds strength and helps to reduce vibrations.
- The polished smooth face has a tempered rim to reduce incidences of chipping.
- Enhanced bi-material grip with peel resistance for longer life.
- 16oz (454 g).
Wrecking Crowbar 300mm (12")
Wrecking crowbar normally used for dismantling timber work, plasterboard and pulling up floorboards and so on.
- Solid forged, hardened and tempered from hexagonal steel.
- Angled chisel end for leverage and claw with integrated nail puller.
- Powder-coated with ground claw and chisel.
- For general wrecking and demolition work.
PowerLock® Classic Metric Pocket Tape 3m
The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades.
- Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook.
- Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip.
- Available in metric only.
Tylon™ Pocket Tape Measure
The Stanley Tylon™ Pocket Tape has a corrosion resistant, long-life Tylon™ coated blade with positive blade lock for accurate measurements.
- Fitted with a Tru-zero hook, that compensates accurately for internal and external measurements, with triple rivet construction for improved strength and durability.
- The impact resistant ABS plastic case is fitted with an ergonomic overmould for all day comfort.
- Shows both metric and imperial graduations.
- Supplied in 3m, 5m & 8m lengths.