Compression flexible waste connector 290mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Plain spigot at one end to fit waste trap.
• Manufactured in polypropylene.
• Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.

Compression flexible waste connector 460mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Plain spigot at one end to fit waste trap.
• Manufactured in polypropylene.
• Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.

Great replacement for any worn or lost rubber olive on McAlpine compression connectors.

• Suitable for domestic repair, maintenance and improvement work.
• To fit only 40mm connectors.
• Conforms to BS EN 1329-1:2000.

Great replacement for any worn or lost plastic washer on McAlpine compression connectors.

• Suitable for domestic repair, maintenance and improvement work.
• To fit only 40mm connectors.
• Conforms to BS EN 1329-1:2000.

Washing machine trap complete with 0.6m upstand pipe and two clips is suitable for installation behind a washing machine when vertical drainage is required for waste water.

• McAlpine 75mm Water Seal Standpipe Trap with 1½" Multifit Outlet.1 ½"
• Suits all plastic to copper or lead pipe.
• Adjustable up to 750mm and can be cut to size.
• Conforms to BS EN 274-1:2002.

Deters rodents from entering the building through WC and prevents cross flow if fitted to back to back WC pans.

• For use with any rigid or flexible WC connector with 4"/110mm rubber outlet seal.
• Can be installed horizontally or vertically.
• Manufactured in black polypropylene to prevent light penetration.

Plastic pan with flexible lip is ideal for general cleaning applications.

• Bannister brush with soft bristles.
• Brush handle clips into the dustpan for compact storage.
• Brush clips into pan for easy of storage.

Protects against non-toxic dusts, fibres and aqueous mists.

• Elasticated strap, mouldable nosepiece and exhalation valve for a comfortable, contoured fit.
• Lightweight and durable.
• Disposable, single use.
• Conforms to EN149:2001+A1:2009.

Protects against non-toxic dusts, fibres and aqueous mists.

• Elasticated strap, mouldable nosepiece and exhalation valve for a comfortable, contoured fit.
• Lightweight and durable.
• Disposable, single use.
• Conforms to EN149:2001+A1:2009.

Spring wire with corkscrew auger probe.

• Strong plastic handle.
• Unblocks drains and clears waste pipes.
• Quick and easy application.

Premium quality fibreglass mesh reinforced aluminium oxide cutting disc.

• Long life and fast, accurate cutting of inox, metal and alloy.
• Suitable for all angle grinders, especially cordless.
• Manufactured and certified to EN12413 with MPA approval.
• Size; 115 x 1.2 x 22.23mm

Premium quality fibreglass mesh reinforced aluminium oxide cutting disc.

• Long life and fast, accurate cutting of inox, metal and alloy.
• Suitable for all angle grinders, especially cordless.
• Manufactured and certified to EN12413 with MPA approval.
• Size; 125 x 2 x 22.23mm

Premium quality fibreglass mesh reinforced aluminium oxide cutting disc.

• Long life and fast, accurate cutting of stone, slab, tile, brick and block.
• Suitable for all angle grinders, especially cordless.
• Manufactured and certified to EN12413 with MPA approval.
• Size; 115 x 3 x 22.23mm

Premium quality fibreglass mesh reinforced aluminium oxide cutting disc.

• Long life and fast, accurate cutting of inox, metal and alloy.
• Suitable for all angle grinders, especially cordless.
• Manufactured and certified to EN12413 with MPA approval.
• Size; 230 x 3 x 22.23mm

Premium quality fibreglass mesh reinforced aluminium oxide cutting disc.

• Long life and fast, accurate cutting of stone, slab, tile, brick and block.
• Suitable for all angle grinders, especially cordless.
• Manufactured and certified to EN12413 with MPA approval.
• Size; 230mm x 3 x 22.23mm

Blade with 7mm segment height for fast cutting and long life.

• Excellent cutting speed and blade life balance.
• For general building use on stone, concrete, pipes, brick, roof tiles, patio slabs and lintels.
• Wet or dry use. Optimum results if used wet.
• Manufactured and certified to EN13236.
• Size; 115 x 3 x 22.23mm

Blade with 7mm segment height for fast cutting and long life.

• Excellent cutting speed and blade life balance.
• For general building use on stone, concrete, pipes, brick, roof tiles, patio slabs and lintels.
• Wet or dry use. Optimum results if used wet.
• Manufactured and certified to EN13236.
• Size; 125 x 2 x 22.23mm

Continuous rim blade with 5mm segment height for smooth, clean cutting.

• Great for ceramic and natural stone tiles, and for prolonged cutting of all types of tile.
• Compatible with 22.23mm bore static tile cutting machines and angle grinders.
• Manufactured and certified to EN13236.
• Size; 115 x 22.23mm

Continuous rim blade with 5mm segment height for smooth, clean cutting.

• Great for ceramic and natural stone tiles, and for prolonged cutting of all types of tile.
• Compatible with 22.23mm bore static tile cutting machines and angle grinders.
• Manufactured and certified to EN13236.
• Size; 180 x 22.23mm.

Suitable for hardwood, softwood, chipboards and other composite materials.

• Hardened and strengthened for longer life.
• Size; 165 x 16 teeth,24 teeth,30 teeth.

Suitable for hardwood, softwood, chipboards and other composite materials.

• Hardened and strengthened for longer life.
• Size; 190 x 20 teeth,24 teeth,40 teeth.

For fast, straight cutting of softwood, timber sheet, plastic pipes and profiles.

• Bayonet fitting HCS blade with side-set milled teeth.
• Working length 75mm.

Reversible K20 tungsten carbide planer blades with two cutting edges.

• Produces a smooth, clean finish.
• Up to 20 times longer lasting than conventional HSS blades.
• Ideal for chamfering & rebating.
• Compatible with most 82mm planers.

Precision ground high-speed steel teeth with faster cutting and increased heat & wear resistance.

• Highly flexible with longer life.
• Made of steel M2.
• 300mm blade size with 18tpi.