Replacement 135° nozzle for wash machine traps.

• Connection for washing or dishwasher machines discharge pipes
• Suitable for most McAlpine traps with 1" Bsp Thread.
• Manufactured in polypropylene.

Solution to plug the existing outlet hose spigot without the need of buying a new trap.

• Quick and simple installation.
• Suitable for most McAlpine traps.
• Manufactured in polypropylene.

Solution to plug the existing bath trap without the need of buying a new trap.

• Quick and simple installation.
• Suitable for 40mm McAlpine bath trap.
• Manufactured in polypropylene.

Multifit compression straight connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Multifit compression 90° bend connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Multifit compression swept tee connector 32/40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Compression Multifit  Reducer 32-40mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Manufactured in polypropylene.
• Conforms to BS EN 274-1:2002.

Compression flexible waste connector 290mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Plain spigot at one end to fit waste trap.
• Manufactured in polypropylene.
• Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.

Compression flexible waste connector 460mm for domestic and commercial use.

• Suitable for all waste pipe connections.
• Plain spigot at one end to fit waste trap.
• Manufactured in polypropylene.
• Conforms to BS EN 1451-1:200 and BS EN 1329-1:2000.

Great replacement for any worn or lost rubber olive on McAlpine compression connectors.

• Suitable for domestic repair, maintenance and improvement work.
• To fit only 40mm connectors.
• Conforms to BS EN 1329-1:2000.

Great replacement for any worn or lost plastic washer on McAlpine compression connectors.

• Suitable for domestic repair, maintenance and improvement work.
• To fit only 40mm connectors.
• Conforms to BS EN 1329-1:2000.

Washing machine trap complete with 0.6m upstand pipe and two clips is suitable for installation behind a washing machine when vertical drainage is required for waste water.

• McAlpine 75mm Water Seal Standpipe Trap with 1½" Multifit Outlet.1 ½"
• Suits all plastic to copper or lead pipe.
• Adjustable up to 750mm and can be cut to size.
• Conforms to BS EN 274-1:2002.

Deters rodents from entering the building through WC and prevents cross flow if fitted to back to back WC pans.

• For use with any rigid or flexible WC connector with 4"/110mm rubber outlet seal.
• Can be installed horizontally or vertically.
• Manufactured in black polypropylene to prevent light penetration.

The ERA SureFire Multi-Point Lock for Timber/Composite doors means effortless locking. Shutting the door engages the trigger and fires all five locking points into the keeps.

•     Unidirectional throw of hooks provides the lock with an enhanced anti-jemmy feature
•     Twin tapered anti-jemmy hooks are designed for both high performance and security
•     Hooks have anti-saw protection and hardened anti-drill inserts
•     Manufactured from lightweight aluminium hooks have been designed with light torque
•     Latch Bolts designed to ensure the door is in the correct position before hooks engage
•     Non Handed

A comprehensive range of adjustable Hook keeps designed to complement the SureFire PVCu door lock.

•   +/- 2mm adjustability, helping aid compression and weathersealing of doors
•     Round ended keeps
•     Left and Right handed
•     Tested to the latest performance requirements

A comprehensive range of adjustable Centre keeps designed to complement the SureFire PVCu door lock.

•   +/- 2mm adjustability, helping aid compression and weathersealing of doors
•    Round ended keeps
•    Left and Right handed
•    Tested to the latest performance requirements

The Architectural Door Handle is a modern lever/lever contemporary handle design perfectly matching into the Fab&Fix product portfolio. Tailored to meet both the needs of new and replacement markets.

• Long baseplate with screw positions to suit most locks
• Ergonomic contemporary lever and low friction nylon bush, easy to grip and smooth action
• Supplied with screw/ spindle pack to suit PVCu profiles - all parts to hand