No products in the cart.
Intumescent Fire Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little off-cuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire & Smoke Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little offcuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Internal Ply Flush Door (Imperial Size)
Internal plywood unfinished paint grade flush door ready to paint.
- An economical solution for both commercial and domestic properties.
- Lipped on the two long edges for ease of installation on refurbishment projects.
- 10 year manufacturer\'s guarantee.
- 35mm thickness.
Plain Steel Bath with Leg Set
2 tap holes steel enamel bath supplied completely with leg set.
- It is an excellent entry level solution for people considering fitting a new or replacing an old bath on a budget.
- Great quality product that offers durability & classic design.
- White enamel steel with scratch, abrasion and acid resistantce.
- 72 Litres Water Capacity.
- Supplied in L1500mm x W700mm x H390mm,L1600mm x W700mm x H390mm & L1700mm x W700mm x H390mm.
Anti Slip Steel Bath with Grips & Leg Set
2 tap holes steel enamel anti slip bath supplied completely with grips & leg set.
- It is an excellent entry level solution for people considering fitting a new or replacing an old bath on a budget.
- Textured anti-slip base.
- Great quality product that offers durability & classic design.
- White enamel steel with scratch, abrasion and acid resistantce.
- 72 Litres Water Capacity.
- Supplied in L1500mm x W700mm x H390mm,L1600mm x W700mm x H390mm & L1700mm x W700mm x H390mm.
Plain Steel Bath Pack with Legs, Taps, Trap & Waste
2 tap holes steel enamel bath pack supplied completely with leg set, taps,trap & waste.
- It is an excellent entry level solution for people considering fitting a new or replacing an old bath on a budget.
- Great quality product that offers durability & classic design.
- White enamel steel with scratch, abrasion and acid resistantce.
- 72 Litres Water Capacity.
- Supplied in L1500mm x W700mm x H390mm,L1600mm x W700mm x H390mm & L1700mm x W700mm x H390mm.
Anti Slip Steel Bath Pack with Taps,Trap,Waste & Grips
2 tap holes steel enamel anti slip bath supplied completely with mixer lever taps, trap, waste, grips & leg set;
- It is an excellent entry level solution for people considering fitting a new or replacing an old bath on a budget.
- Textured anti-slip base.
- Great quality product that offers durability & classic design.
- White enamel steel with scratch, abrasion and acid resistance.
- 72 Litres Water Capacity.
- Supplied in L1500mm x W700mm x H390mm,L1600mm x W700mm x H390mm & L1700mm x W700mm x H390mm.
Snap-on Pipe Clip
Openlock are made from heat resistant polypropylene.
- Designed to withstand the temperature changes in most central heating systems.
- The pipe simply snaps into the bracket.
- Suitable for 15/22mm pipe connections.
Hinged Pipe Clip
Designed to withstand the temperature changes in most central heating systems.
- Self-locking tops, tested to over 100lb pull.
- Manufactured from heat resistant polypropylene.
- Suitable for 15/22mm pipe connections.
Speedfit Layflat Pipe 25M Coil
Lightweight and flexible pipe for wide range on installation applications in domestic and commercial use.
- Easy to handle and ideal for cabling through joists.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Copper Pipe 3m Tube
Traditional copper pipes for domestic and commercial installations above ground services.
- Highly durable, easy to work with and to install.
- Corrosion and ultraviolet resistant.
- Biostatic with excellent thermal conductivity.
- WRAS Approved, Conforms to - BS EN1057.
Speedfit Equal Straight Coupler
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Equal Elbow
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Equal Tee
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Stop End
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Tube Support
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
End Feed Straight Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Equal 90° Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy, low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed 90° Street Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed 45° Obtuse Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.