No products in the cart.
End Feed Metric to Imperial Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For conversion installation from Metric to Imperial size and vice versa.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Bent Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Straight Tap Connector
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
Compression Coupler M1
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation from Imperial to Metric.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 300mm
Stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Braided Flexible Tap Connector 500mm
Extra long stainless steel braided flexible hose with 15mm compression fitting at one end and female bsp thread at the other end.
- Suitable for most kitchen and bathroom taps.
- Easy to install with no soldering or heat required.
- Easy fix for difficult pipe work.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Expert Range Spirit Level
Manufactured from 1.2mm thick extruded aluminium with milled top and bottom faces, ribbed sides and protective end caps.
- Box section width 59mm with hanging hole for storage.
- Accurate to 1mm/m. with 45°, 90° and 180° vials.
- Supplied in 600mm, 900mm and 1200mm.
SDS Plus Masonry Drill Bit
For professional drilling in concrete and masonry.
- Tungsten carbide tip offers fast, easy drilling.
- Shot-peined finish which hardens the surface of the bit and also helps to eliminate stress fractures.
- Fully hardened (HRC 48) chrome-alloy steel body ensures long bit life and minimises breakage.
- Drills clean, accurate fixing and clearance holes.