No products in the cart.
Grade 13 Fire Hinges Satin Stainless Steel 102 x 76mm
Contract range durable Grade 13 Fire Hinges with wood screws.
- Usually used for FD30 & FD60 fire doors.
- Fire rated; Conforms to BS EN 1935 grade 13. BS EN 1634 standards
- Stainless steel with Satin finish.
- Supplied in a pack of two or three.
Intumescent Fire Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little off-cuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire & Smoke Seal Pack White 2.1m x 2 & 1.05m x 1
Intumescent fire seal door pack consist of two side lengths and one top length to cover surrounding of the door in one nicely sized pack with little offcuts.
- Seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- Self adhesive strip allowing for a quick and easy installation.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
- Pack consist of 2.1m x 2 & 1.05m x 1.
Intumescent Fire Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 1.05m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 1.05m short length top of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Intumescent Fire & Smoke Seal White 2.1m
Intumescent fire seals expand in the event of a fire and seal off the gap between the door and the frame, preventing the spread of fire and smoke.
- 2.1m long length side of the door self-adhesive, single fire door seal.
- Use 15mm seals on new door application and 10mm seals for replacement or retrofitting.
- Supplied in white only at 10mm and 15mm.
Internal 30 Min Fire Check Door FD30 (Metric Size)
This door is FD30 rated, offering at least 30 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- An economical solution for both commercial and domestic properties.
- 10 year manufacturer\'s guarantee.
- Ready to stain or paint with semi-solid core.
- 44mm thickness.
Snap-on Pipe Clip
Openlock are made from heat resistant polypropylene.
- Designed to withstand the temperature changes in most central heating systems.
- The pipe simply snaps into the bracket.
- Suitable for 15/22mm pipe connections.
Hinged Pipe Clip
Designed to withstand the temperature changes in most central heating systems.
- Self-locking tops, tested to over 100lb pull.
- Manufactured from heat resistant polypropylene.
- Suitable for 15/22mm pipe connections.
Speedfit Layflat Pipe 25M Coil
Lightweight and flexible pipe for wide range on installation applications in domestic and commercial use.
- Easy to handle and ideal for cabling through joists.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Copper Pipe 3m Tube
Traditional copper pipes for domestic and commercial installations above ground services.
- Highly durable, easy to work with and to install.
- Corrosion and ultraviolet resistant.
- Biostatic with excellent thermal conductivity.
- WRAS Approved, Conforms to - BS EN1057.
Speedfit Equal Straight Coupler
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Equal Elbow
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Equal Tee
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Stop End
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
Speedfit Tube Support
Fully removable and reusable push fit system for quick installation.
- No tools needed - push straight onto copper tube.
- Suitable for Drinking Water.
- Suitable for central heating systems.
- Manufactured and kitemarked to Bristish Standard BS7291: Part3: Class S
End Feed Straight Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Equal 90° Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy, low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed 90° Street Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed 45° Obtuse Elbow
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Equal Tee
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
End Feed Stop End
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For capping copper pipes and fittings with lead free solder.
- Easy,low cost effective connection.
- WRAS Approved - Conforms to - EN1254-1: 1998.
Compression Straight Coupler
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For connecting copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.