No products in the cart.
Multi-Purpose Limescale Remover Spray 500ml
Kilrock Limescale Remover Power Spray Cleaner is the ultimate spray descaler and cleaner.
- Dissolves limescale with rapid action and quick results.
- Leaves a lasting shine and has a pleasant citrus smell.
- Removes hard water drip stains quickly and effectively from sinks, baths, taps, showers, tiles, etc.
Wash Hand Basin 2 Tap Hole 590 x 420mm
Wall hung wash hand basin pack supplied with pair of taps and McAlpine combined trap & waste for complete installation.
- Incredibly durable and stylish, making it a great addition to any contemporary bathroom.
- Made from quality vitreous china.
- Dimensions: H:216mm x W:590mm x D:420mm
Corner Wash Hand Basin 2 Tap Hole 470 X 417mm
Wall hung corner wash hand basin with two tap hole design & overflow.
- Incredibly durable and stylish, making it a great addition to any contemporary bathroom.
- Made from quality vitreous china.
- Dimensions: H:195mm x W:470mm x D:417mm
Low Level Ceramic Cistern & Fittings
Lever operated traditional low level cistern is perfect for commercial installations and replacements.
- Tough and durable ceramic.
- Low level cistern with side entry fittings.
- Supplied with all fittings.
- Dual flush 6/4 litre.
- Universal lever fit on left or right hand.
Low Level WC Pan
The classic low-level WC Pan with a horizontal outlet suitable for commercial & domestic use.
- Can be screwed to the floor with the cistern screwed to the wall and supported on brackets.
- Washdown action with open flushing rim.
- Tough and durable ceramic.
- Dimensions: H;400mm,W;368mm,D;510mm
Trade Toilet Pack To Go
Trade Toilet Pack to Go with soft close seat suitable for commercial & domestic use.
- The no frills complete toilet set that will go in any bathroom.
- Supplied with all fittings & soft close seat.
- 6 litre cistern capacity.
- Bottom entry fittings.
- Width – 380mm, Depth – 657mm, Height – 757mm
Wash Hand Basin Towel Rail Brackets 1 pair
A pair of 12" (300mm) aluminium towel rail brackets for wash hand basin.
- Durable and easy to install.
- Grey cast aluminium.
Multi Grade Steel Wool
Trade grade steel wool for removing paint, varnish & rust, for cleaning & surface preparation.
- Suitable for use with a chemical stripper.
- Very flexible to reach in and around the corners.
- Contains 3 grades: 4x coarse, 4x medium and 4x fine.
Jigsaw Bayonet Blades for Metal 5pk
High quality bi-metal, 100mm jigsaw blade set for cutting metal.
- Bayonet fitting HCS blade with side-set milled teeth.
- Working length 75mm.
4" Flexible Filler Knife
Flexible blade filler knife with ergonomic soft grip handle.
- Rust free mirror finish ensures durability.
- Spring tempered high carbon steel blade.
- Hanging hole for easy storage.
6" (150mm) Wall Scraper & 5 Blades
6 " (150mm) Heavy duty scraper with 5 blades.
- Used for removing paint, tiles, flooring, adhesives, sealant and scale.
- 6" razor sharp blade and comfort grip handle.
- Twin grips for added purchase.
50 Pce Utility Blades with Dispenser
General purpose replacement blades for retractable and fixed blade knives.
- For use with utility knives, trimmers and scrapers.
- Made from hardened carbon steel for sharpness.
- Housed in plastic storage case.
100 Pce Utility Blades with Dispenser
General purpose replacement blades for retractable and fixed blade knives.
- For use with utility knives, trimmers and scrapers.
- Made from hardened carbon steel for sharpness.
- Housed in plastic storage case.
6” (150mm) Heavy Duty Scraper Blades - 10pk
Heavy duty replacement blades for 6" scraper.
- Use with floor and wall scrapers for removal of dirt and grime.
- Made from hardened carbon steel for sharpness.
Wood Chisels
Two component ergonomic handle with heat treated chrome vanadium steel blade and bevel edged.
- Split proof polypropylene handles can be struck with a hammer or mallet.
- Supplied in sizes;6, 12, 19, 25 and 32mm.
19pc HSS Drill Bit Set
High quality HSS drill bits suitable for drilling hardened steel, cast iron, titanium, stainless steel and can also be used on wood and plastic.
- High heat resistance for particularly tough metal drilling.
- Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm.
- Robust display box.
6 pce Flat Wood Bit
Fully hardened and tempered for drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass.
- Precision ground point and shoulders for a superior clean cut and reduced splintering.
- Hex shank for quick change, for use with drills, drivers and hand braces.
- Angled cutting edges give faster cleaner cutting.
- Sizes: 10, 12, 16, 18, 20, 25mm.
25mm (1") SDS Plus Chisel
Made of hardened and tempered drop forged steel.
- Suitable for removing wall and floor tiles, splitting bricks or concrete.
- Ideal for use with any SDS machine.
Heavy Duty Adjustable Wrench 250mm (10")
High quality carbon steel, drop forged for durability.
- Chrome plated finish for corrosion protection.
- Max jaw opening: 31mm.
Heavy Duty Pro Wrecking Bar 600mm (24" )
Wrecking crowbar normally used for dismantling timber work, plasterboard and pulling up floorboards and so on.
- Solid forged, hardened and tempered from hexagonal steel.
- Angled chisel end for leverage and claw with integrated nail puller.
- Powder-coated with ground claw and chisel.
- For general wrecking and demolition work.
3 in 1 Staple & Staples Kit
Sturdy steel gun with impact pressure adjustment lock.
- Adjustable power control allows for precise control and lock down handle allows for safe storage.
- Suitable for 4-14mm staples, 10-12mm U staples & 10-14mm nails.
- Comes with 200: 12mm U staples, 10mm nails and 8mm staples in plastic storage case.
3 pce 13mm Key Chuck Set
1/2" x 20 UNF thread enables you to hold conventional bits in an SDS drill.
- Suitable for cordless and AC hammer action drills.
- Supplied with SDS plus adaptor and chuck key.
- 2-13mm capacity.
Steam Wallpaper Stripper 2000W
2000 watt wallpaper stripper ideal for removing all types of wallpaper. Uses tap water and strips multiple layers of paper.
- 3m flexible hose and controlled temperature.
- Fast heat-up time with 80 mins working time.
- 4.5Ltr capacity and 320 x 325mm steam pad.
Max 26" Toolbox & Organiser
Impact resistant toolbox with two metal latches, three durable rear hinges and built-in padlock eye for security.
- Two in-built side handles and extra latches for secure carriage.
- In-lid storage and tote tray for efficient organisation.
- Removable tote tray 550 x 270 x 45mm.
- Dimensions: 710 x 315 x 290mm.