No products in the cart.
Active filters
Euro Profile Cylinder & Thumbturn 6 pin NP
Anti drill and anti pick lock, ideal where front controlled access is needed from outside and quick access/privacy provided via Thumbturn on the inside.
- Easy to replace/fit, one screw method.
- 6 Pin mechanism for higher security and greater key variations
- Please check cylinder measurement Diagram before ordering.
- Fits most of euro profile mortice locks.
- Lock cylinder supplied with 3 keys.
- Sizes Available:70mm, 80mm, 90mm, 100mm.
Aluminium Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim End Cap
Designed to fit bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim Corner
Corner Trim designed to connect worktops at a 90° angle.
- Perfect alignment and fit with worktop at 90° joint.
- Light & strong aluminium.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Aluminium Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Black Worktop Trim "T" Joint
Designed to join bullnose radius worktops with all major worktop brands.
- Perfect alignment and fit with worktop.
- Light & strong aluminium in matt black finish.
- 630mm long easily cuts to length required.
- Universal left or right fitting.
Plywood Solid Core Blank Fire Door FD30
This door is 60 min fire rated, offering at least 60 minutes of protection against fire spreading when installed with fire rated linings & hardware.
- Solid core blank is a versatile door which can be used in a variety of scenarios.
- Door blank can be cut to accommodate different frame sizes.
- Solid core door blank ready to paint.
- 44mm thickness.
Compression Stop End
Suitable for use on hot and cold water services, heating installations, fuel services and industrial engineering applications.
- For capping copper pipes with compression installation.
- Easy & quick installation with no soldering or heat required.
- Can be dismantled and rebuilt, works well at high pressure providing a watertight seal.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.
Flexible Rubber Coupling
Time saving solution to convert from the old lead pipes to PVC solvent waste pipes.
- Works with cast iron, plastic, copper, lead and steel pipes.
- Ideal for permanent use & emergency repairs.
- Reusable with no glueing, just tighten with a screwdriver.
- Resistant to chemicals, UV and fungus damage.
- Flexible and durable pvc rubber.
Compression Gate Valve
Light pattern brass gate valve comes with a wheel head and 15mm compression fittings for quick, simple installation.
- Used for isolating or restricting water supply.
- Easy to use and is suitable for use with hot and cold water.
- Reusable with copper olive only replacement.
- WRAS Approved - Conforms to - BS EN1254-2.