Inset stainless steel kitchen sink pack supplied complete with pillar taps, waste and McAlpine trap with W/M spigot.

• Made from high-grade 18/10 stainless steel suitable for commercial & domestic use.
• Heavy duty sink will not bend or flex under pressure.
• Two tap hole with left or right hand installation.
• Bowl Size; W;420 x D;350 x H;160
• Dimensions: W;950mm, D;508mm, H;160mm.

This low-profile Folding Shower Seat with Legs is specifically designed to facilitate sitting down while taking a shower. When not in use it folds flat against the wall, making efficient use of space in the shower cubicle. With strong legs of epoxy-coated steel and an aluminium wall fixing plate, the Folding Shower Seat with Legs is both strong and durable. Drainage holes in the moulded seat mean there is no slippery standing water.

• The sturdy design carries weight up to 173kg/27 stone
• Strong legs of epoxy-coated steel and an aluminium wall-fixing plate
• The seat adjusts in height from 390-680mm (15 1/2-26 3/4 inches)
• Dimensions: H:1070,W:460,D:380mm

Premier D-Shape Quick Release Soft Close Toilet Seat with Top Fix.

• Supplied with a top fixing system.
• Easy to install, clean and maintain.
• Dimensions; W370mm x L450mm x H45mm
• Hinge centres; 125mm – 175mm

Soft Close Quick Release Toilet Seat with comfortable and durable base.

• Quick release system with simple dual fixing for easy installation.
• Soft closing action on the seat helps the seat and lid to close down slowly.
• Easy to clean with top fixing; remove the whole seat off its hinges quick.

Universal design Tecnoplast toilet seat and cover with colour matching bumpers and hinges.  

• Adjustable hinges supplied non-corrosive standard fixing hardware.
• Supplied with all the fixings.
• Dimensions: 471mm x 370mm
• Hinge centres: 135-175mm

A Bolt-On-Leg Set for all Kaldewei Eurowa Baths, featuring a durable steel frame with plastic legs.

• Suitable for all Eurowa Series bath tubs.
• Easy to fit.

Chrome twin bath grips to suit the Kaldewei Eurowa baths.

• Easy to fit.
• Safe grip.

For use with low level cisterns.

• Correct fitting from cistern to the WC pan.
• Polypropylene & Rubber.
• Can be Cut to Size.

Backwall Fitting WC Flush Pipe For use with high level cisterns.

• Correct fitting from cistern to the WC pan.
• Polypropylene & Rubber.
• Can be adjusted or cut to Size.

Replacement low level S.I.S.O cistern kit with chrome lever.

• 2-part duo-flush siphon with flush pipe, ball valve & fittings.
• Water-saving reduced flush.
• Easy to install with built-in internal overflow.
• Convertible from 4 to 6 ltr.

A traditional replacement 2-part duo-flush siphon for cisterns.

• Easy to install and can be serviced without disconnecting water supply or dismantling cistern.
• Water-saving reduced flush when lever is held down and a full flush when lever is depresssed and released.
• Dual flush function with internal overflow.

The Skylo side entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a rotating float protected by a float shield meaning it can squeeze into the tightest cisterns. 

• Compact
• 180 Degree Rotation Float
• Water Saving Delayed Fill
• Quiet Fill

The Skylo bottom entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a float shield meaning it can squeeze into the tightest cisterns. It can adjust in height from 8" to 12". 

• Compact
• Telescopic
• Water Saving Delayed Fill
• Quiet Fill

Side entry adjustable lever arm between 6" and 9" to enable fitting into the majority of toilet cisterns.

• Suitable for toilet cisterns and cold water storage tanks.
• With red low pressure restrictor attached to the float arm.
• Anti-siphon design prevents contamination of fresh water supply.
• WRAS approved.

Bottom entry adjustable lever arm between 6" and 9" to enable fitting into the majority of toilet cisterns.

• Suitable for toilet cisterns and cold water storage tanks.
• With red low pressure restrictor attached to the float arm.
• Anti-siphon design prevents contamination of fresh water supply.
• WRAS approved.

Use in cold water storage tanks, central heating feed and expansion header tanks, toilet cisterns.

• Easy to fit and long lasting.
• High quality brass material.
• Manufactured in accordance with BS1212 part 1.

Use in cold water storage tanks, central heating feed and expansion header tanks, toilet cisterns.

• Easy to fit and long lasting.
• High quality brass material.
• Manufactured in accordance with BS1212 part 1.

Water saving dual flushing valve with full and part flush volume settings.

• Adjustable internal overflow, making it ideal for both new and retrofit installations.
• Base adjustable from 2" to 1.5".
• Adjustable internal overflow.
• WRAS approved.

Suitable for WC cisterns, header tanks and cold water storage tanks.

• Comes with a brass inset thread to suit most ball valves.
• Brass insert threaded 5/16" to suit ½" & ¾" float valves.

Great and secure way of securing plug to the basin or sink.

• Simple & quick installation.
• Stylish and simple ball type chain.
• 305mm (12") No. 6 ball chain with stay and hook.

Great and secure way of securing plug to the bath or sink.

• Simple & quick installation.
• Stylish and simple ball type chain.
• 475mm (18") No. 6 ball chain with stay and hook.

Replacement plug for wash hand basins.

• Made from tough and durable plastic.
• Supplied in black only.

Replacement plug for sink or bath.
Made from tough and durable plastic.
Supplied in black only.

Replacement plug & chain for wash hand basins.

• Basin Plug 38mm (1.1/2") & Ball Chain 305mm with Stay.
• Plug made from tough and durable plastic.
• Supplied in black only.